조선시대 석회가마 연구 = A Study about Lime-kiln During Joseon Dynasty
저자
발행기관
학술지명
권호사항
발행연도
2011
작성언어
Korean
주제어
자료형태
학술저널
수록면
65-99(35쪽)
제공처
소장기관
석회는 다양한 분야에서 이용되어져 왔으나, 석회가마를 비롯한 관련유구가 조사된 사례가 많지 않아 생산방법을 구체적으로 파악하기 어려웠다. 최근 들어 조선시대 석회가마의 조사 성과가 꾸준히 증가하고 있으나 연구 성과의 축적은 미비하다. 이에 문헌기록과 고고학적 조사 성과를 중심으로 조선시대 석회가마의 구조적 특징과 성격에 대하여 살펴보고자 한다. 문헌기록상으로 석회소성의 구체적인 방법은 『朝鮮王朝實錄』과 『天工開物』 등의 일부 사료에서 확인되는데, 석회의 용도는 능묘의 조성, 선박·성곽 축조 및 보수 등에 이용되었다. 조선시대 석회가마는 지역적으로 경기 및 충청지역에 한정되어 있다. 경기지역에서는 파주와 오산으로 구분되며, 각 1기씩 조사되었다. 충청지역에서는 아산, 진천, 청양, 보은, 대전 등지에서 조사되었으며, 보은 적암리유적을 제외하면 대부분 1~2기가 단독 분포한다. 조사된 석회가마는 대부분 장축방향이 등고선과 직교하는 지하식 등요로 사면 말단부에 위치하고 있다. 현재까지 조사된 석회가마는 아궁이의 단면형태는 외고내저로 동일하나, 연소실과 소성실의 구조 및 위치를 통해 크게 Ⅰ·Ⅱ식 등 두 가지 형식으로 구분된다. Ⅰ식은 소성실과 연소실이 상·하 수직으로 배치되어 연결되는 점이 가장 특징적이다. 또한 전체적인 단면형태가 ``L``자형으로 출입구(아궁이)가 짧게 축조되었으며, 출입구보다 연소실이 더 깊게 조성되었다. 이에 비해 Ⅱ식은 일정한 높이의 단벽으로 연소실과 소성실이 구분되어 여타 가마의 구조와 유사한 일반적인 등요의 형태이다. 소성실의 형태는 (타)원형으로 동일하며Ⅰ식은 소성실 바닥이 편평하거나 중앙이 약간 깊게 조성되었다. 또한 중앙의 원통형 구멍을 통해 연소실로 연결되어 있어 소성실~연소실의 전체적인 단면형태는 역삼각형을 띠고 있다. 이에 비해 Ⅱ식은 소성실이 10° 미만의 경사도가 있으며, 단면형태도 상광하협으로 차이를 보이고 있다. 한편, 연도부는 파주 당하리·대전 원신흥동 2호요를 제외하고 확인되지 않는다. 회구부를 제외한 평면형태는 열쇠구멍과 유사하며, 여타 가마에 비해 소형이다. 이는 높은 화력으로 인한 기물의 변형 및 파손에 대한 부담이 상대적으로 덜하기 때문에 고열을 내는 구조로 집중되었던 것으로 추정된다. 조업연대는 파주 당하리 및 아산 산양리·용두리 등의 고지자기분석 결과 보아 17~18세기에 조업이 이루어진 것으로 추정된다. 또한 대부분의 석회가마 내부에서는 석회석이 출토되고 있다. 한편, 당하리 석회가마에서는 많은 양의 석회석이 출토되었을 뿐만 아니라 굴 껍데기 등의 패각류가 확인되었는데, 굴껍데기는 『천공개물』 뿐만 아니라 전통방식의 호분 제조에도 이용되고 있어 이러한 예를 보여주는 사례로 판단된다. 한편, 문헌기록을 통해 국초부터 교하현 일대에서 꾸준히 석회생산이 이루어졌으며, 국가 주도로 생산이 이루어졌던 것으로 추정된다. 교하일대에서 조사된 석회가마는 당하리유적을 제외하고 조업시기를 파악하기 어려우나 교하일대가 전·후기를 막론하고 오랫동안 석회 생산이 이루어졌던 것으로 파악되어 문헌기록과 좋은 대비를 이룬다. 석회가마의 소성으로 이루어진 결과물은 고고학적 유물이 아닌 석회이기 때문에 내부에서 출토된 유물로 조업시기를 판단하기에는 어려움이 있다. 따라서 조업연대 추정을 위해 고지자기 및 방사성탄소연대 측정과 함께 내부에서 출토되는 석회석에 대한 암질분석을 통해 산지 추정 등을 병행하는 것이 바람직할 것이다.
더보기Until now few researches have conducted on related relics and remains, including lime-kiln and it seems difficult to understand production method in detail, even though lime has been believed to be used for various fields and purposes. Recently the outcomes of researches on lime-kiln during Joseon Dynasty have increased; however, the accumulation of researches and outcomes are rather immaterial since there are still a lot of unstudied relics and remains. In this study, I will briefly touch the structural characteristics of lime-kiln during Joseon Dynasty, mainly basing on related references and archeological researches conducted up until now. Details of lime-firing were described in "the Annals of the Joseon Dynasty" and "Chinese document(『天工開物』)", and lime is believed to have been used for royal mausoleum, including construction and repair of vessels and fortresses. Dispersion of lime-kiln built in Joseon Dynasty is limited in Gyonggi and Chungcheong province. Gyonggi province divided Paju and Osan, one remain has been discovered in each region respectively. In Chungcheong province, one or two remains are discovered in Asan, Jincheon, Chungyang, Boeun and Daejeon area, except for Boeun Joekam-ri. Studied lime-kiln are largely cellar-typed whose direction of long-axis meet contour lines at right angle and located in the lower parts of slope. The cross section of fireplace of the discovered kiln are identical to a high-exterior-low-interior type, but most kilns are classified into two types as Ⅰ, Ⅱ by the structure and location of combustion chamber and firing chamber. TypeⅠis unique in that firing chamber and combustion chamber are built vertically. Cross section view is ``L`` typed and entrance(fireplace) is built rather short, making combustion chamber deeper than firing chamber. Whereas, combustion area and firing area is divided by walls of same height, which is similar to other ordinary kiln. The shape of combustion chamber is oval, same as in typeⅠ and Ⅱ; however, in case of type Ⅰ, the floor of combustion chamber is flat or deeper in central part of it. Connected through the cylindrical hole, the cross section diagram from combustion chamber to firing chamber is inverted-triangle in shape. On the other hand, type Ⅱ has a combustion chamber with less than 10 degree slant, and cross section diagram is a wide-top-narrow-bottom shape, differentiating type Ⅰ. Meanwhile, except for Dangha-ri in Paju and the 2nd kiln of Wonshinheung-dong in Deajeon, chimneys(煙道部) have not been confirmed. Except for ``ash treating area(灰邱部)``, cross section diagram looks a keyhole in shape and smaller than other ordinary kiln. It is assumed that with this structure, deformation and demolition of materials by high temperature might be avoided, therefore this structure was suitable for making and keeping high temperature. Production process is believed to have been conducted between 17C and 18C, according to result of "paleo-magnetism analysis" from Dangha-ri and SanYang-ri and Yongdu-ri in Asan. Additionally, limestones from almost all lime-kiln have been discovered. By the way, out of lime-kiln of Dangha-ri, large portions of lime stones have been discovered along with shell fishes, such as oyster shells. Oyster shells were used not only in "Chinese document(『天工開物』)" also in production of ``Hobun``. According to the related literature, early in Joseon Dynasty, lime seems to have been produced and the process has been led by the state in the region of Gyo-ha. It is difficult to decide the production period of lime furnace discovered in Gyo-ha and neighboring regions, except for remains of Dangha-ri; however, in these regions lime was produced for a long time, concurring with references from related documents. Materials from firing process of kiln are considered not as archeological relics but as lime itself, and deciding production time by relics from the furnace seems not simple and easy. In order to confirm the production era, paleo-magnetism and radio-carbon dating need to be conducted. Moreover, estimation of production site should be considered, through lithologic analysis of limestones from the inside of the kiln.
더보기분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)