(A) Study on Chemical Mechanical Planarization Characteristics of Polycrystalline Chalcogenide Material = 다결정 칼코게나이드 물질의 화학적 기계적 연마특성에 관한 연구
저자
발행사항
서울 : 한양대학교 대학원, 2013
학위논문사항
학위논문(박사)-- 한양대학교 대학원 : 나노공학과 2013. 2
발행연도
2013
작성언어
영어
주제어
발행국(도시)
서울
형태사항
x, 118 p. : 삽도 ; 26 cm.
일반주기명
지도교수:박재근
권두 Astract, 권말 국문요지 수록
참고문헌 : p. 102-114
소장기관
Phase-change Random Access Memory (PCRAM) is increasingly becoming one of the most candidates for nonvolatile memories in the future memory market. In the fabrication process for the confined cell structure below 30nm design rule, chemical mechanical polishing (CMP) should be adopted after the deposition of Ge2Sb2Te5 GST on the bottom electrode contact followed by patterning the confined cell. The effect of slurry pH and hydrogen peroxide (H2O2) on polycrystalline Ge2Sb2Te5 (pc-GST) CMP performance was investigated. The polishing rate of pc-GST film increased when the slurry pH decreased or increased from neutral pH. In addition, pc-GST polishing rate was highly affected by adding H2O2, resulting in a high pc-GST polishing rate at pH 2-11. However, a noticeable difference in surface roughness of pc-GST film polished was observed between acidic (pH 2) and alkaline (pH 11) regions. Low RMS of roughness as well as a high polishing rate of pc-GST film was obtained in the acidic pH region with 1wt% H2O2. In contrast, in the alkaline region a high RMS of roughness of pc-GST film was observed owing to enhanced selective corrosion between Ge, Sb, and Te elements. And the role of H2O2 in alkaline slurry on the polishing rate of pc-GST film was investigated. The polishing rate of pc-GST films increases sharply with the H2O2 concentration up to 0.2 wt % and then increases slightly with a further increase in H2O2 concentration up to 3.0 wt%. However, the polishing rate of SiO2 films very slightly increases with H2O2 concentration up to 3 wt%. Polishing selectivity of pc-GST films to SiO2 films of over 100:1 can therefore be achieved by adding H2O2 to the slurry. And the chemical mechanical planarization (CMP) mechanism of pc-GST using nitric acid slurry without or with 1.0 wt% H2O2 was investigated. Without H2O2, the pc-GST film surface undergoes selective corrosion of Ge and Sb, resulting in pitting corrosion. Otherwise, with H2O2, the pc-GST film surface produces a Ge, Sb, Te oxide layer, thereby introducing a cyclic polishing process such as chemical oxidation, chemical and mechanical polishing, and sequential chemical oxidation. As a result, the polishing rate increased up to ~1000 Å/min and the surface roughness was decreased 0.86 nm.
더보기분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)