Fe-12Mn-10Cr-8Ni-6Si 합금의 형상기억능에 미치는 가공열처리 및 변형온도의 영향 = Effect of Thermomechanical Teatment and Deformation Temperature on Shape Memory Capacity in an Fe-12Mn-10Cr-8Ni-6Si Alloy

제어번호 : 3233210

저자명 : 최영민 ,이종수 ,이언식 ,안상호 ,남원종

학술지명 : 대한금속·재료학회지(Korean Journal of Metals and Materials)

권호사항 : Vol.31 No.5 [1993]

발행처 : 대한금속재료학회(대한금속학회)

발행처 URL : http://www.kim.or.kr

자료유형 : 학술저널

수록면 : 623-631(9쪽)

언어 : Korean

발행년도 : 1993년

KDC : 436

등재정보 : KCI등재

소장기관 :

  • 고려대학교 중앙도서관
  • 서울대학교 중앙도서관
  • 영남대학교 과학도서관
  • 중앙대학교 서울캠퍼스 중앙도서관

제공처 : 유료 KISS

  • 다국어 초록 (Multilingual Abstract)
    • A study was undertaken to investigate the effect of cooling rate, deformation temperature and thermomehanical treatment on shape memory capacity in an Fe-12Mn-10Cr-8Ni-6Si(wt.%) alloy. Among the several specimens which were cooled at different cooling rate from the single γ phase region, water quenched specimens showed the best shape memory effect, presumably due to the high amount of stacking fault and the lack of thermally induced martensite plates. The amount of shape recovery increased with decreasing deformation temperature for all the cooling conditions. When the deformation temperature range was near the Ms temperature (about 77K), shape recovery capacity was good regardless of cooling paths. In addition, a thermomechanical treatment (4% prestrain followed by annealing at 873K for 1 hr) on water quenched specimens was found to enhance ultimate tensile strength, yield strength and shape memory capacity compared to those of water quenched specimens. The improvement of shape memory capacity of thermomechanically treated specimens seemed to be attributed to the increase in yield strength and the shift of M_d temperature from 320K to 400K.
  • 목차
    • 1. 서론
    • 2. 실험방법
    • 합금제조
    • 형상 회복 시험
    • 고온 및 저온 인장시험
    • 상분석 및 미세조직 관찰
    • 3. 결과 및 고찰
    • 급냉속도 및 변형온도가 형상기억능에 미치는 영향
    • 가공열처리 및 변형온도가 형상기억능에 미치는 영향
    • 4. 결론