KCI등재
파워 소자의 고속 다이 접합을 위한 5 μm Cu@Sn 입자 기반 프리폼의 천이액상 소결접합 특성 = Transient Liquid-Phase Sinter-Bonding Characteristics of a 5 μm Cu@Sn Particle-Based Preform for High-Speed Die Bonding of Power Devices
To ensure the high-temperature stability of a bondline under next-generation power devices suchas SiC semiconductors, a die bonding test was performed by transient liquid-phase (TLP) sinter-bonding usinga Sn-coated Cu (Cu@Sn) particle-based preform. Compared to the existing 20 min-bonding result using a 30μm Cu@Sn particle-based preform, a 5 μm Cu@Sn particle-based preform was used to significantly reducethe bonding time to 5 min, and the optimal levels of the amount of Sn in the Cu@Sn particles, the thicknessesof Sn surface finish layers on the chip and substrate, and compression pressure during the bonding wereinvestigated. The Sn content in the Cu@Sn particles significantly changed the microstructure, including theporosity of the prepared preform. The preform porosity of 0.01% was confirmed after the formation of sufficientSn shells with an average thickness of about 602 nm at Sn 30 wt%. In addition, in the preform with Sn 30wt% content, the Sn phase was almost depleted after 3 min after annealing at 250 °C. The Sn finish layerwas evaluated in the thickness range of 0.63−4.12 μm, and it was observed that the shear strength of theformed bondline tended to increase with increasing pressure for all Sn layer thicknesses. In particular, whenthe bonding was carried out at a pressure of 2 MPa using a dummy Cu chip and substrate coated with a 1.53μm thick Sn layer, the best shear strength value of 36.89 MPa was achieved. In this case, all the Sn phasestransformed into intermetallic compound phases of Cu6Sn5 and Cu3Sn, and all the phases formed within thebondline, including Cu, exhibited high melting-point characteristics. Therefore, it was determined that therewould be no remelting of the bondline or a drastic decrease in mechanical properties in a high-temperatureenvironment below 300 oC, as initially intended. By increasing the content of the Sn shell up to 30 wt%, itwas possible to achieve a nearly full density (porosity: 0.3%) bondline structure, due to the rearrangementbehavior of particles, by maintaining liquid Sn for a long time during the bonding process. In conclusion, theoptimal Sn finish thickness was determined to be at the level of 1.5 μm, and the optimal pressure was at thelevel of 2 MPa. The short bonding time of 5 min represents a significant advance in TLP bonding processes,and it is expected to contribute to a substantial improvement in the die bonding of future SiC power devices.
더보기분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)