Investigation of Single Point Incremental Sheet Forming Process: Extraction of Constitutive Models and Parameters Optimization
저자
발행사항
제주 : 제주대학교 대학원, 2021
학위논문사항
학위논문(박사)-- 제주대학교 대학원 : 에너지응용시스템학부 기계공학전공 2021. 8
발행연도
2021
작성언어
영어
주제어
KDC
530
발행국(도시)
제주특별자치도
형태사항
xxiii, 165 p. ; 26 cm
일반주기명
지도교수: Jung, Dong Won
UCI식별코드
I804:49002-000000010156
소장기관
The incremental forming process (ISF) is one of the prominent sheet metal manufacturing techniques among the traditional forming methods; it’s becoming more noticeable these days due to its flexibility for manufacturing complex parts without utilizing predefined forming dies. Besides, the ISF process has higher formability of formed parts at a low cost than the conventional sheet forming methods. Additionally, the consistent and reasonable work material characterization in both room and warm temperature conditions under various strain rates is remarkably essential for modeling the numerical simulation and optimizing the sheet metal forming process working parameters. This research work’s contributions to the ISF process can be organized into the following sections: at first, the field emission scanning electron microscopy (FESEM) analysis combined with the energy-dispersive X-ray spectroscopy (EDS) technique is employed to conduct the elemental identification investigation. Secondly, the Digital Image Correlation (DIC) technique is used to investigate the work materials for assessing their material properties. For this purpose, the digital images at each deformation step, which provide complete displacement and strain data information until the fracture more accurately, are used. Further, the empirical models such as the original and modified Johnson-Cook models, modified Zerilli-Armstrong model, the strain-compensated Arrhenius-type constitutive equation, and hybrid machine learning model are proposed for describing the material flow behavior during hot deformation conditions. Overall, the proposed constitutive equation from the artificial neural network model combined with an optimization approach is proved to have good predictability in flow stress estimation. Eventually, the single incremental forming process (SPIF) is modeled using a customized vertical milling machine to investigate the SPIF process. The design of experiments (DOE) combined with the grey relational analysis (GRA), the response surface methodology (RSM), and statistical analysis of variance (ANOVA) is adopted for determining the process parameter's influence on the material formability without producing a rupture. The DOE procedure, a face-centered central composite design, is adopted for the AA3003-H18 Al alloy sheets for conducting the tests. The RSM procedure is used for optimizing the process parameters and identify the optimal experimental conditions. The statistically proposed model is observed from the outcome to be in good agreement with the experimental measurements. ANOVA is conducted to explain the proposed model's adequacy and the input factor's influence on the output factor. The statistically proposed regression model is observed to agree with the experimental estimations, having a higher R2 (0.8931) with lower prediction error (2.78%). The process parameters, such as step size, feed rate, the interaction effect of tool radius and step size, positively influence the response variable. Similarly, the input factors are optimized using the Taguchi method to minimize the surface roughness of formed parts. Firstly, according to the smaller-the-better, the S/N ratios are estimated to make a response table for getting the optimum level of process parameters. Minimum surface roughness is accomplished when the vertical step-size is smaller, the feed-rate is high, and the forming tool radius is high. The optimum level setting is acquired at 3.0 mm of forming tool radius (level 3), 3000 rpm of spindle speed (level 1), 0.10 mm of vertical step size (level 1), and 2000 mm/min of feed rate (level 4). The ANOVA results such as p-test and F--test revealed that vertical step-size, feed-rate, and tool radius significantly affect surface roughness. In contrast, the spindle speed is witnessed to have no significant influence on surface roughness. The Taguchi design results conferred better agreement with the actual measurements with moderate model error (approximately 1.8%). Additionally, the microstructural evaluation revealed that the thinning behavior tended to increase as forming depth reached its maximum; the material deformation was also observed to be uniform and homogeneous.
더보기ISF(점진 성형 공정)는 기존의 성형 방법 중 대표적인 판금 제조 기법 중 하나다. 사전 정의된 성형 다이를 활용하지 않고 복잡한 부품을 제조할 수 있는 유연성으로 인해 오늘날 더욱 주목을 받고 있다. 게다가, ISF 공정은 기존의 시트 성형 방법보다 저렴한 비용으로 성형 부품의 성형성이 우수하다. 또한 다양한 변형률 하에서 실내 및 온열 온도 조건 모두에서 일관되고 합리적인 작업 재료 특성은 수치 시뮬레이션을 모델링하고 판금 성형 공정 작업 매개 변수를 최적화하는 데 매우 중요하다. 본 연구의 ISF 공정에 대한 기여는 처음에는 field emission scanning electron microscopy (FESEM) 분석과 에너지 분산 X선 스펙트럼 분석(EDS) 기법을 결합하여 소자 식별 조사를 실시하는 섹션으로 나눌 수 있다. 둘째, DIC (Digital Image Correlation) 기법을 사용하여 재료 특성을 평가하기 위한 작업 재료를 조사한다. 이를 위해 파단까지의 변위 및 변형 데이터 정보를 제공하는 각 변형 단계의 디지털 영상이 사용된다. 또한, 고온 변형 조건에서의 재료 흐름 거동을 설명하기 위해 최초 및 수정된 Johnson-Cook 모델, 수정된 Zerilli-Armstrong 모델, 변형률 보정 Arrhenius형 구성 방정식, 하이브리드 기계 학습 모델 등의 경험적 모델을 제안한다. 전반적으로, 인공신경망 모델의 제안 구성 방정식은 최적화 접근법과 결합된 흐름 응력 추정에 좋은 예측 가능성을 가지고 있는 것으로 입증되었다. 결국, 단일 점진 성형 공정(SPIF)은 SPIF 공정을 조사하기 위해 맞춤형 수직 밀링 머신을 사용하여 고안되었다. Grey relational analysis (GRA), response surface methodology (RSM), statistical analysis of variance (ANOVA)과 결합된 실험 설계(DOE)는 공정 매개변수가 파열을 일으키지 않는 상황에서 재료 성형성에 미치는 영향을 위해 채택되었다. 실험 실행을 위한 AA3003-H18 Al 합금 시트에 표면 중심의 중앙 합성 설계인 DOE 절차가 채택되었다. RSM 절차는 공정 변수를 최적화하고 최적의 실험 조건을 식별하는 데 사용된다. 통계적으로 제안된 모델은 실험 측정과 잘 일치하는 결과로부터 관찰된다. ANOVA 분석은 제안된 모형의 적합성과 입력 인자가 출력 인자에 미치는 영향을 설명하기 위해 수행된다. 통계적으로 제안된 회귀 모형은 더 높은 결정 계수(R2)(0.8931)와 더 낮은 예측 오차(2.78%)를 갖는 실험 추정과 일치하는 것으로 관찰된다. 스텝 크기, 이송 속도, 공구 반지름의 상호작용 효과, 스텝 크기와 같은 프로세스 파라미터는 반응 변수에 긍정적인 영향을 미친다. 마찬가지로 입력 계수는 Taguchi 방법을 사용하여 최적화되어 성형 부품의 표면 거칠기를 최소화한다. 첫째, 작을수록, S/N 비율은 프로세스 매개변수의 최적 수준을 얻기 위한 반응 표를 만드는 것으로 추정된다. 최소 표면 거칠기는 수직 스텝 크기가 작고 이송 속도가 높으며 성형 공구 반경이 높을 때 이루어진다. 최적의 레벨 설정은 성형 공구 반경 3.0mm (레벨 3), 스핀들 속도 3000rpm (레벨 1), 수직 스텝 크기 0.10mm (레벨 1), 이송 속도 2000mm/min (레벨 4)에서 획득한다. P-시험 및 F-시험 등의 분산 분석 결과에 따르면 수직 단계 크기, 공급 속도 및 공구 반경은 표면 거칠기에 상당한 영향을 미친다. 반면, 스핀들 속도는 표면 거칠기에 큰 영향을 미치지 않는 것으로 확인되었다. Taguchi 설계 결과는 중간 정도의 모형 오차(1.8%)를 갖는 실제 측정값과 더 잘 일치하는 결과를 얻었다. 또한 미세구조 평가 결과 형성 깊이가 최대에 도달하면 박리 거동이 증가하는 경향이 있었으며 재료 변형도 균일하고 균일한 것으로 관찰되었다.
더보기분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)