Integrated Manufacturing Process Design of Al6061 Alloy Bolts for Fastening Offshore Platforms = 해양구조물 체결을 위한 Al6061 합금 볼트의 통합 제조공정 설계
저자
발행사항
부산 : 한국해양대학교 대학원, 2019
학위논문사항
학위논문(석사)-- 한국해양대학교 대학원 : 기관공학과 2019. 2
발행연도
2019
작성언어
영어
주제어
발행국(도시)
부산
형태사항
94 ; 26 cm
일반주기명
지도교수: 이경훈
UCI식별코드
I804:21028-200000180065
소장기관
최근 수송 분야에서 경량화에 대한 관심이 증가하면서, 각종 수송 기계 부품에 비철금속을 적용하는 사례가 늘고 있다. 특히, 6xxx 계열의 알루미늄 합금은 낮은 비중량, 우수한 기계적 특성 및 높은 내식성으로 인해 소형 선박에서부터 해양 구조물에 이르기까지 다양한 해양 분야에 적용되고 있다. 패스너를 사용한 기계식 체결은 사용이 쉽고 적용이 용이하여 알루미늄 합금과 강재의 접합에 널리 사용되어왔다. 현재까지도 산업 현장에서는 알루미늄 합금과 강재의 체결을 위해 스테인리스강 볼트가 사용되고 있다. 그러나 알루미늄 합금의 모재에 기존의 스테인리스강 볼트를 사용하게 되면 중량의 증가뿐만 아니라 알루미늄 모재에서 갈바닉 부식이 발생하게 되고 이것은 특히 해양 환경에서 더욱 가속화된다. 따라서 스테인리스강 볼트를 알루미늄 합금 볼트로 대체하는 것은 추가적인 경량화를 도모할 수 있을 뿐만 아니라 해양 환경에서 이러한 갈바닉 부식의 생성을 미연에 방지할 수 있다.
현재까지 알루미늄 합금 볼트 성형에 대해 일부 연구들이 수행되어 왔다. 그러나 대부분의 연구들은 재료의 성형성 평가에 국한되어 있으므로 성형 공정에 대한 명확하고 체계적인 설계 기준이 없다. 또한, 볼트를 제조하기 위해 필수적인 트리밍 및 전조 공정의 설계가 누락되어있다.
따라서 본 연구에서는 해양구조물 체결을 위한 Al6061 합금 볼트의 통합 제조공정 설계를 수행하였다. 이를 위해 이론 설계 및 수치 해석을 진행하였다. 이론 설계에서는, 스크류 규격과 기하학적 관계를 고려하여 전조 공정의 초기 소재경과 압입 깊이를 계산하였다. 헤딩 공정을 위한 초기 소재 치수는 체적일정법칙으로 구하였다. 결함 예측에 사용되는 공정 한계를 고려하여, 공정 단수를 설정하고, 헤딩 공정의 설계 규칙에 의해 예비 형상을 결정하였다. 또한 설계된 헤딩 공정에 대해 슬래브법을 사용하여 성형 하중을 예측하였다. 이론 설계를 바탕으로 헤딩, 트리밍 및 전조 공정에 대한 유한요소해석을 수행하였다. 헤딩 및 트리밍 공정 중에 발생하는 결함을 예측하기 위해 연성파괴기준을 적용하였다. 또한 전조 공정에서 금형의 압입량, 이송 속도 및 분당 회전수, 트리밍 공정에서는 펀치의 곡률 반경, 하부 금형의 랜드 폭 및 펀치와 하부 금형간의 정지 거리를 각각 설계 변수로 선정하고 다구찌법을 통해 공정을 최적화하였다. 제안 된 설계 방법을 검증하기 위해 알루미늄 합금 볼트 성형 실험을 수행하였고 높은 치수 정확도를 갖는 건전한 형상의 Al6061 합금 볼트를 얻을 수 있었다.
In recent years, with the increasing interest in weight reduction in the transportation sector, the application of non-ferrous metals to various transportation machinery parts has been increased. In particular, the 6xxx series of aluminum alloys are commonly used in marine applications from small vessels to offshore structures due to its low specific weight, high quality mechanical properties, and high resistance to corrosion. In order to join aluminum alloy and steel, mechanical joint by fasteners has been widely used because it is easy-and-practical for the application. Until now, stainless steels bolts have been used for fastening aluminum alloys and steels to industrial sites. However, when the stainless steel bolt is used for the base material of aluminum alloy, weight increases and galvanic corrosion occurs in aluminum, which is accelerated in marine environment particularly. Therefore, substituting aluminum alloy bolts for stainless steel ones can prevent such corrosion promotion in marine environment as well as extra weight increase.
To date, several studies have been conducted on aluminum alloy bolt forming. However, most studies are limited to the evaluation of formability of materials, so there is no clear and systematic design criterion for the forming process. Furthermore, the design of the trimming and thread-rolling
process, essential for manufacturing bolts, was not considered.
Therefore, the integrated manufacturing process design of Al6061 alloy bolts for fastening offshore platforms was performed in this study. To do this, we carried out theoretical design and numerical analysis. At theoretical design, the initial rod diameter and the penetration depth in thread-rolling process were calculated according to the screw standards and geometric relation. Thereafter, the dimensions of the initial workpiece for the heading process were obtained by volume constancy law. Considering process limitations to predict the defects, the number of the stage was set, and preform was determined by the design rule in the heading process. In addition, the forming load for the designed heading process was predicted by using the slab method. Based on theoretical design, FE-analysis for the heading, trimming and thread-rolling process was conducted. The ductile fracture criterion was applied to predict the defects during the heading and trimming process. In addition, the Taguchi method is used to optimize the trimming and thread-rolling process with the set of design parameters, such as the penetration depth, transfer velocity, and revolutions per minute of rolling dies in the thread-rolling process, and the blade radius of the punch, land width of the bottom die, and stop distance between the punch and bottom die in the trimming process, respectively. To verify the proposed design, the aluminum alloy bolt forming experiment was carried out and sound Al6061 alloy bolt with high dimensional accuracy was obtained.
분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)