정·동강성을 고려한 5축 복합가공기의 설계최적화에 관한 연구 = A study on design optimization of 5-axis multi-tasking machine tools considering static and dynamic stiffness
저자
발행사항
경산 : 대구대학교 대학원, 2021
학위논문사항
학위논문(석사)-- 대구대학교 대학원 : 기계공학과 기계 및 자동차공학 전공 2021. 8
발행연도
2021
작성언어
한국어
주제어
발행국(도시)
경상북도
형태사항
x, 93 ; 26 cm
일반주기명
지도교수: 윤재웅
UCI식별코드
I804:47009-200000502800
소장기관
고속 및 고정밀에 대한 요구가 증가함에 따라 복합 가공 공구의 강성과 진동에 대한 관심이 높아지고 있다. 그러나 개발 기간 단축이 어렵기 때문에 구조적 최적화를 위한 FEM 사용이 증가하고 있다. 그러나 구조물의 응력 분포를 통한 최적화가 주로 사용되기 때문에 진동 상태를 고려한 최적화가 어렵다. 본 논문에서는 헤드 최적화를 위해 정적 구조 해석, 모달 해석, FEM을 이용한 조화 해석을 수행하여 복합 가공 공구의 작업성에 큰 영향을 미친다. 변수를 설정하여 정적 구조와 동적 강성을 모두 고려한 토폴로지 최적화 해석 방법을 제안하고 이를 재해석하고 검증하고자 한다. 또한 스핀들의 회전으로 인해 헤드 구조에 열이 발생하므로 열에 의한 변형을 고려하기 위해 열전달 및 열 변형 해석을 추가로 수행하였다.
5 축 복합 가공 공구 구조의 정적 구조 및 동적 강성 해석 결과 변형량에는 큰 문제가 없었으나 일부 구조에서는 공진 위험이 있었다. 이 문제를 해결하기 위해 정적 구조 및 동적 강성 해석 결과를 기반으로 토폴로지 최적화 해석을 수행하고 토폴로지 최적화 해석 결과를 기반으로 구조를 재설계하였다. 재설계된 구조의 정적 개선 및 동적 강성을 검증하기 위해 재분석을 수행하였다. 재해석의 정적 구조 및 모달 해석 결과 헤드 구조의 외형각과 리브 두께를 변경하여 변형량을 16 % 개선하고 중량을 2.1 % 감소시켰으며 공진 주파수도 작동 주파수 범위에서 크게 벗어나 정적 및 동적 강성 측면에서 모두 개선 된 것으로 확인되었다. 기둥 구조의 경우 측면의 모양과 내측 리브의 두께가 바뀌었고 무게에는 큰 변화가 없었지만 변형량은 24 % 개선되었다.
본 논문에서 연구 한 결과, 정적 강성만을 고려한 최적화 해석 문제를 해결하기 위해 정적 강성과 동적 강성을 모두 고려한 해석 방법을 제안하고 검증하였다. 헤드 및 기둥 구조의 정적 구조 및 동적 강성을 고려하여 토폴로지 최적화 해석을 수행하였으며, 최적화 된 구조의 정적 및 동적 강성 해석을 재수 행하여 최적화를 통한 구조 개선 방법 검증을 완료했습니다. 토폴로지 최적화를 분석적으로 수행 한 결과 중량 감소 및 강성 향상이 이루어졌습니다. 5 축 복합 가공기의 구조를 개선하기 위해 정적 강성과 동적 강성을 고려한 토폴로지 최적화 해석의 타당성을 수행 하였다. 또한 이 논문의 결과를 바탕으로 최적화 분석을 확장하여 다른 구조를 개선 할 수 있습니다.
As the demand for high speed and high precision increases, interest in rigidity and vibration of multi-tasking machining tool is increasing. However, since it is difficult to shorten the development period, the use of FEM for structural optimization is increasing. However, since optimization through the stress distribution of the structure is mainly used, it is difficult to optimize considering the vibration state. In this paper, static structural analysis, modal analysis, and harmonic analysis using FEM were performed to optimize the head, which greatly affects the workability of the multi-tasking machining tool. By setting variables, we propose a topology optimization analysis method that considers both static structure and dynamic stiffness, and reinterpret and verify it. In addition, since heat is generated in the head structure due to the rotation of the spindle, heat transfer and thermal deformation analysis were additionally performed to consider the deformation due to heat.
As a result of the static structure and dynamic stiffness analysis of the 5-axis multi-tasking machining tool structure, there was no significant problem in the amount of deformation, but there was a risk of resonance in some structures. To solve this problem, topology optimization analysis was performed based on the static structure and dynamic stiffness analysis results, and the structure was redesigned based on the topology optimization analysis results. Re-analysis was carried out to verify the improvement of static structure and dynamic stiffness of the redesigned structure. As static structure and modal analysis results of the re-analysis, the external shape angle and internal rib thickness of the head structure were changed, and the amount of deformation was improved by 16% and weight was reduced by 2.1%. It was confirmed that the resonant frequency also greatly deviated from the operating frequency range and improved both in terms of static and dynamic stiffness. In the case of the column structure, the shape of the side and the thickness of the inner rib were changed, and there was no significant change in weight, but the amount of deformation was improved by 24%.
As a result of the study in this paper, an analysis method to consider both static stiffness and dynamic stiffness was proposed and verified to solve the problem of optimization analysis that only considered static stiffness. A topology optimization analysis was performed considering the static structure and dynamic stiffness of the head and column structure, and the verification of the structural improvement method through optimization was completed by re-executing the static and dynamic stiffness analysis of the optimized structure. As a result of performing topology optimization analytically, weight reduction and rigidity improvement were achieved. In order to improve the structure of the 5-axis multi-tasking machine, the validity of the topology optimization analysis considering both the static and dynamic stiffness was performed. In addition, based on the results of this paper, the optimization analysis can be extended and utilized to improve other structures.
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)