ECO2를 활용한 업무용 공공건축물의 에너지절약 설계에 관한 연구
저자
발행사항
서울 : 중앙대학교 건설대학원, 2013
학위논문사항
학위논문(석사) -- 중앙대학교 건설대학원 , 그린빌딩시스템학과 , 2013. 8
발행연도
2013
작성언어
한국어
발행국(도시)
서울
기타서명
A study on the energy-saving design for public office buildings using ECO2 program
형태사항
iv, 67 p. ; 26 cm
일반주기명
지도교수: 박진철
참고문헌 수록
DOI식별코드
소장기관
The law on the creation and assistance for green buildings has recently been enacted and proclaimed, which provided institutional strategy for the reduction of greenhouse gas emissions and expansion of green buildings. In line of this, the standard for certification was set up with the revision of the adjective regulation, so called 「the rules regarding the certification of energy efficiency rating for structures」, which was designed to make the certification applicable to all new and existed structures. In spite of considerable energy saving effect due to such pursuit of policy for energy saving of buildings as this law regulations, there still is little availability of design technique for energy saving by the related experts such as architects and construction engineers.
In view of this, the study will take into account the energy effect elements and the saving technique centering around office buildings and make a suggestion of design process for energy saving which is applicable to the design phase by related professionals on the basis of cases of service application to energy savings which made good use of evaluation tools(ECO2) for energy efficiency rating for structures. Through this, the basic data shall be furnished not only for the contribution to energy reduction but also for realization of green buildings leading to ultimate decrease in green house gas emissions.
The outcome of this study is outlined like this:
(1) Office buildings generally have higher density of internal heat than those of common structures. In consideration of the environmental features of office structures like this, it is important to make a plan focusing on the curtailment of air-conditioning cooling load in application of energy saving technique.
(2) Through the analyses on the practical cases in which ECO2 has been put into use, the assay was conducted on the energy saving rate based on the application of element techniques for energy saving of office buildings. In the strengthening of heat insulation property in correspond with passive design technique and the application of windows and doors SHGC reduction, the demand of energy was reduced by 5.0% and 5.7% respectively from the original forms. In case of the minimization of illumination density relevant to the active design technique, the improvement of air-conditioning system, the application of total heat exchanger and the promotion of the facility efficacy showed the reduction of 7.5%, 5.1%, 7.8% and 10.2% respectively against the original forms. Finally, in the expansion of the installation capacity of renewable energy, the figure of the amount of the first energy consumption could be reduced by 57.4%.
(3) Thanks to the application of element technology for the integrated energy saving, there were the curtailments both of energy demand by 24% and of energy consumption by 92%. Lastly, the amount of the first energy consumption reached at –1.0(kWh/㎡․y) and realized ZEB(Zero Emission Building).
(4) By reflecting the phased energy saving element techniques, the design process could be constituted, including the main points to be considered from the initial phase. Through the constitution of initial integrated design team, the goals for energy efficiency must be set up by field and the evaluation on the quantitative energy performance by alternative needed to be carried out at the construction planning phase. And the final planned proposal will be settled through the review and inspection on whether alternative energy efficacy can meet the goal set at the early stage.
As this study excluded the comparison of element techniques among various practical cases and analyses on the economic feasibility, there was an inevitable limit in prioritizing in consideration of the efficiency per amount of money by element technique. Besides, in view of the features of selected cases, the assessment on the element technique for energy saving was not made at the arrangement and formal design stage. From this perspective, it is assumed that the study on the energy reduction rate and analysis on economics in a variety of cases will be continuously conducted in the future.
최근 「녹색건축물 조성 지원법」이 제정되어 공포되었고, 이는 앞으로 우리나라 건축물 부문의 온실가스감축과 녹색건축물 확대를 위한 제도적인 장치가 마련되었다고 할 수 있다. 또한 하위규정인 「건축물 에너지효율등급 인증에 관한 규칙」이 개정되어 앞으로 에너지효율등급 인증이 모든 용도의 신축 및 기존 건축물에 적용 가능하도록 인증기준이 마련되었다. 이러한 건축물 에너지 절약에 관련된 정책의 추진으로 상당한 에너지 절약 효과를 거두고 있지만 건축가, 설비기술자 등 관련분야 전문가들의 에너지 절약 설계기법에 대한 활용도는 아직 미미한 상황이다.
따라서 본 연구에서는 업무용건축물을 중심으로 에너지 영향요소 및 절약기법에 대해 고찰하고, 건축물에너지효율등급 평가툴(ECO2)을 활용한 에너지절약 실무적용 사례를 바탕으로 관련분야 전문가들이 설계단계에서 활용 가능한 에너지절약 설계 프로세스를 제안하고자 한다. 이를 통해 에너지 절감에 기여하고 궁극적으로 온실가스를 저감시키는 녹색건축물 구현을 위한 기초자료를 제공하고자 하였다.
본 연구의 결과를 요약하면 다음과 같다
(1) 업무용건축물은 일반건물에 비해 내부발열이 차지하는 비중이 크기 때문에 에너지절약기법 적용 시 냉방부하저감에 초점을 두고 패시브설계기법, 액티브설계기법, 신재생에너지활용 등을 종합적으로 검토하여 계획하여야 한다.
(2) ECO2를 활용한 실무사례 분석을 통해 업무용건축물의 에너지절약 요소기술 적용에 따른 에너지 절감율을 분석하였다. 패시브 설계기법에 해당하는 단열성능강화 및 창호 SHGC 절감 적용 시에는 에너지요구량이 각각 원안대비 5.0%, 5.7% 절감되었으며, 액티브 설계기법에 해당하는 조명밀도 최소화, 공조방식 개선, 전열교환기 적용, 설비효율 향상 시에는 에너지소요량을 기준으로 각각 원안대비 7.5%, 5.1%, 7.8%, 10.2% 절감되었다. 신재생에너지 설치용량 확대 시에는 1차에너지소요량이 원안대비 57.4% 절감되는 것으로 나타났다.
(3) 에너지절약 요소기술을 통합적으로 적용해 본 결과, 원안대비 에너지요구량은 24%, 에너지소요량은 92% 로 절감할 수 있었고 최종적으로 1차에너지소요량은 -1.0(kWh/㎡․y)로 나타나 ZEB(Zero Emission Building)의 구현이 가능함을 확인하였다.
(4) 건축설계프로세스 단계별로 고려해야할 에너지절약 요소기술을 부문별로 정리하여 제시하였다. 특히 설계초기단계에서는 통합설계팀 구성을 통해 에너지성능 도달 목표를 분야별로 구체적으로 설정해야하며, 건축계획 단계에서는 시뮬레이션 기법을 활용한 대안별 에너지성능 평가를 수행하여 설정한 목표의 달성여부를 검증한 후 최종계획안을 확정하는 것이 타당함을 확인하였다.
본 연구에서는 다양한 사례에 대한 요소기술의 비교 및 경제성에 대한 분석이 이루어지지 않았기 때문에 요소기술별 금액대비 효율을 고려한 우선 순위를 정하는데에 한계가 있었다. 또한 선정한 실무사례의 특성 상, 배치 및 형태계획 단계에서의 에너지절약 요소기술에 대한 분석이 이루어지지 않았다. 추후 연구에 있어 다양한 사례에 대한 에너지 절감율 및 경제성 분석에 관한 연구가 지속적으로 진행되어야 할 것으로 판단된다.
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
| 주요 개정내역 | 변경 사유 |
|---|---|
| · 수탁업체 콘소시엄 기관명 및 위탁기간 명시 | · 제6조(개인정보 처리업무의 위탁) 구체화 |
한국교육학술정보원은 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
제1조(개인정보의 처리 목적)
제2조(개인정보의 처리 및 보유 기간)
제3조(처리하는 개인정보의 항목)
제4조(개인정보파일 등록 현황)
제5조(개인정보의 제3자 제공)
제6조(개인정보 처리업무의 위탁)
제7조(개인정보의 파기 절차 및 방법)
제8조(정보주체와 법정대리인의 권리·의무 및 그 행사 방법)
제9조(개인정보의 안전성 확보조치)
제10조(개인정보 자동 수집 장치의 설치·운영 및 거부)
제11조(개인정보 보호책임자)
제12조(개인정보의 열람청구를 접수·처리하는 부서)
제13조(정보주체의 권익침해에 대한 구제방법)
제14조(추가적 이용·제공 판단기준)
제15조(개인정보 처리방침의 변경)
제1조(개인정보의 처리 목적)
제2조(개인정보의 처리 및 보유 기간)
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)
제3조(처리하는 개인정보의 항목)
제4조(개인정보파일 등록 현황)
개인정보파일 검색(privacy.go.kr)| 개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 |
보유기간 | |
|---|---|---|---|---|
| 학술연구정보서비스 이용자 가입정보 | 한국교육학술정보원법 정보추제 동의 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
| 선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 | |||
제5조(개인정보의 제3자 제공)
제6조(개인정보 처리업무의 위탁)
제7조(개인정보의 파기 절차 및 방법)
제8조(정보주체와 법정대리인의 권리·의무 및 그 행사 방법)
제9조(개인정보의 안전성 확보조치)
제10조(개인정보 자동 수집 장치의 설치·운영 및 거부)
제11조(개인정보 보호책임자)
| 구분 | 담당자 | 연락처 |
|---|---|---|
| KERIS 개인정보 보호책임자 | 정보보호본부 안재호 |
- 이메일 : jinuk@keris.or.kr - 전화번호 : 053-714-0158 - 팩스번호 : 053-714-0195 |
| KERIS 개인정보 보호담당자 | 개인정보보호부 송진욱 | |
| RISS 개인정보 보호책임자 | 교육학술데이터본부 정광훈 |
- 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
| RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
제12조(개인정보의 열람청구를 접수·처리하는 부서)
제13조(정보주체의 권익침해에 대한 구제방법)
제14조(추가적인 이용ㆍ제공 판단기준)
제15조(개인정보 처리방침의 변경)
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)