고로슬래그 미분말과 수산화칼슘 함유량에 따른 차수그라우트재 개발 = Development of Water-resistant Grout according to Blast Furnace Slag Fine Powder and Calcium Hydroxide Content

국문 초록 (Abstract)

그라우팅 공법은 연약지반의 보강과 방수 및 지하수위저하 또는 상승과 진동으로 인한 침하 및 부등침하로 손상된 구조물의 지지력을 높이고 차수를 높이는 목적으로 사용된다. 본 연구는 보강섬유를 이용하여 그라우트재료의 강도와 경화시간을 증대시키기 위하여 고로슬래그 기반의 무시멘트 그라우트재를 개발하고자 하였다. 이와 관련하여 본 연구에서는 고로슬래그 3종 미분말의 알칼리 자극제인 수산화칼슘과 배합하여 사용하였고 수산화칼슘의 함유량은 고로슬래그 미분말 대비 10, 20, 30%까지 치환하여 사용하였다. 또한 보강섬유 유무에 따른 강도를 비교하기 위하여 각 섬유를 0.5%씩 추가하여 실험을 수행하였다. 탄소섬유 및 아라미드 섬유 함유량이 증가함에 따라 일축압축강도가 증가하였고, 이는 그라우트재 내에 섬유에 의한 가교작용이 일축압축강도를 증가시키는 경향을 확인하였다. 또한 알칼리자극제의 함유량이 증가할수록 겔타임이 급격하게 감소하는 것을 확인하였다.

다국어 초록 (Multilingual Abstract)

The grouting method is used for reinforcing and waterproofing the soft ground, increasing the bearing capacity of structures damaged by lowering or subsidence due to rise and vibration, and for ordering. This study attempted to develop a blast furnace slag-based cementless grout material to increase the strength and hardening time of the grout material using reinforcing fibers. In this regard, in this study, it was used in combination with calcium hydroxide, which is an alkali stimulant of the three fine powders of blast furnace slag, and the content of calcium hydroxide was used by substituting 10, 20, and 30% of the fine powder of blast furnace slag. In addition, in order to compare the strength according to the presence or absence of reinforcing fibers, an experiment was performed by adding 0.5% of each fiber. As the content of carbon fibers and aramid fibers increased, the uniaxial compressive strength increased, and it was confirmed that the crosslinking action of the fibers in the grout material increased the uniaxial compressive strength. In addition, it was confirmed that the gel time sharply decreased as the content of the alkali stimulate increased.

참고문헌 (Reference)

• 1 장현오, "고로슬래그 미분말을 혼입한 보통강도 고유동 콘크리트 배합에 관한 실험적 연구" 대한건축학회 29 (29): 81-88, 2013
• 2 김영희, "고로슬래그 미분말과 천연잔골재를 사용하는 모르타르의 강도증진에 미치는 OPC 및 순환잔골재 치환율의 영향" 대한건축학회 29 (29): 81-88, 2013
• 3 김준호, "고로슬래그 미분말과 알칼리 자극재로서 순환골재를 사용하는 콘크리트의강도발현 특성" 한국건설순환자원학회 2 (2): 107-114, 2014
• 4 정지용, "고강도 고로슬래그 혼합 시멘트 페이스트의 수화 및 포졸란 반응에 미치는 고로슬래그 미분말의 치환률과 분말도의 영향" 한국콘크리트학회 27 (27): 115-125, 2015
• 5 Talling, B., "present state and future of alkali-activated slag concretes" 114 : 1519-1546, 1989
• 6 Banthia, N., "Toughness enhancement in steel fiber reinforced concrete through fiber hybridization" 37 (37): 1366-1372, 2007
• 7 Oh, J. E., "The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash based geopolymers" 40 (40): 189-196, 2010
• 8 Adam, A. A., "Strength of mortar containing activated slag and fly ash: design materials and construction" 2007
• 9 Park, T. B., "Physio-chemical characteristics of slag based zero-cement grout" Myongji University 2017
• 10 Marjanović, N., "Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends" 41 (41): 1421-1435, 2015
• 11 Hardjito, D., "On the development of fly ash based geopolymer concrete" 101 (101): 467-472, 2004
• 12 Romualdi, J. P., "Mechanics of crack arrest in concrete" 89 EM3 : 147-168, 1963
• 13 Gao, J., "Mechanical properties of steel fiberreinforced, high-strength, lightweight concrete" 19 (19): 307-313, 1997
• 14 Lee, H. H., "Material capacity evaluation of concrete using blast furnace slag powder and recycled coarse aggregate" 36 (36): 1523-1524, 2016
• 15 Nath, S. K., "Influence of iron making slags on strength and microstructure of fly ash geopolymer" 38 : 924-930, 2013
• 16 Kang, S. T., "Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete" 145 : 37-42, 2016
• 17 Shah, S. P., "Handbook of Structural Concrete, 1" 1-14, 1984
• 18 Soroushian, P., "Fiber type effects on the performance of steel fiber reinforced concrete" 88 (88): 129-134, 1991
• 19 Shah, S. P., "Fiber reinforced concrete properties" 68 (68): 126-135, 1971
• 20 Yang, Y. H., "Evaluation of reinforcement effect of grouting using Aramid fiber" Chosun University 2017
• 21 Park, K. H., "Evaluation of applicability of environment friendly biogrouting methods in loose frictional soils" Chosun University 2015
• 22 Han, C. G., "Engineering characteristics analysis of high strength concrete followed in replacement ratio increase in blast furnace slag" 4 (4): 62-68, 2009
• 23 Bernal, S. A., "Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends" 33 : 99-108, 2012
• 24 Kim, Y. W., "Containing aramid fiber reinforced concrete research" Kyungpook National University 2010
• 25 Seo, M. G., "Carbon fiber manufacturing methods and applications" 21 (21): 130-140, 2010
• 26 Guerrieri, M., "Behavior of combined fly ash/slag-based geopolymers when exposed to high temperatures" 34 (34): 163-175, 2009
• 27 Jo, S. G., "An experimental study on the workability and engineering properties of concrete using ground granulated blast furnace slag" 1 (1): 43-50, 2013
• 28 Hyeon, H.J., "An experimental study on the properties of the cementless lightweight aerated concrete with blast furnace slag" Konkuk University 2017
• 29 Choi, Y. S., "An experimental study on the engineering properties of self-healing eco-friendly grout material" ngji University 2016
• 30 Bakharev, T., "Alkali activation of Australian slag cements" 29 (29): 113-120, 1999
• 31 Kim, H. C., "A study on the development of a grouting material containing blast furnace slag and carbon fiber" Chosun University 2017