그을음 제거 후 훼손된 지문 현출에 관한 연구 = A Study on the development of damaged Fingerprints after Soot Removal
저자
발행사항
아산: 순천향대학교 대학원, 2022
학위논문사항
학위논문(석사)-- 순천향대학교 법과학대학원 : 법과학과 2022. 8
발행연도
2022
작성언어
한국어
주제어
DDC
363.25 판사항(23)
발행국(도시)
충청남도
형태사항
viii , 51 p.: 삽화; 26 cm
일반주기명
지도교수: 유제설
단면인쇄임
참고문헌: p. 43-48
UCI식별코드
I804:44009-200000635700
소장기관
화재 현장에서 발견되는 증거물에서 지문 유류물이 증발하기 전에 표면에 그을음이 덮어지면, 고온에 노출된 후에도 개인을 식별할 수 있는 상태의 지문을 현출할 수 있다. 그을음으로 덮여 있는 증거물에서 지문을 현출하기 위해서는 지문 현출 기법을 적용하기 이전에 그을음을 제거하는 과정이 필요하다. 그을음이 표면에 퇴적되어 있기 때문에 그을음 제거 기법을 적용하는 과정에서 배경에 퇴적된 그을음이 제거되어 지문을 현출할 수 있다. 하지만 그을음을 제거하는 과정에서 현출된 지문이 훼손되는 한계가 존재한다.
본 논문에서는 그을음의 종류에 따른 효과적인 그을음 제거 방법을 찾고, 그을음 제거 과정에서 지문이 훼손되거나 없어진 경우에 Vacuum Metal Deposition(VMD) 기법을 통해 금과 아연을 증착시켰을 때의 영향을 확인하였다. 불 위치를 조정하여 지문이 유류된 표면에 건조한 그을음과 끈끈한 그을음을 유도하였다. 이후 브러시법, 정전기 전사법, 테이프 전사법, 2% sodium hydroxide와 초음파 세척기를 사용한 기법으로 그을음을 제거하였다. 그을음 제거 후 지문이 훼손되거나 없어진 경우 VMD 기법을 적용하였다.
결과적으로, 건조한 그을음에서는 브러시로 그을음을 털어내는 방법이 그을음을 깔끔하게 제거하고 지문과 배경 사이의 대조비가 좋았다. 정전기 전사법과 테이프 전사법 또한 그을음을 효과적으로 제거하였지만, 그을음의 퇴적으로 인해 굴곡이 존재하는 경우에는 그렇지 못하였다. 끈끈한 그을음에서는 2% sodium hydroxide와 초음파 세척기를 이용하는 기법이 다른 기법에 비하여 그을음을 깔끔하게 제거하였지만, 지문이 부분적으로 훼손되거나 현출되지 않는 문제점이 존재하였다. 지문이 훼손되거나 현출되지 않은 검체에 VMD 기법을 적용한 결과, 지문을 현출할 수 있지만 물자국으로 인해 지문의 대조비가 좋지 않았다.
화재 현장에서 수집한 증거에 덮여 있는 그을음이 건조한 그을음인지 끈끈한 그을음인지 판단하는 것은 어렵다. 따라서 지문의 훼손을 최소화하기 위하여 비파괴적인 기법을 우선 적용할 필요가 있다. 브러시를 통해 표면에 존재하는 그을음을 제거한 후, 제거되지 않는 그을음은 2% sodium hydroxide가 담긴 초음파 세척기에 넣어 제거하면 그을음이 깔끔하게 제거된다. 이때 지문이 훼손된 경우 VMD 기법을 적용한다면 훼손된 지문을 현출할 수 있을 것이다.
In evidence found at the fire site, if soot is covered on the surface before fingerprinting evaporates, fingerprints that can identify individuals even after exposure to high temperatures may emerge. In order to development a fingerprint from evidence covered with soot, a process of removing soot is required before applying the fingerprint expression technique. Since soot is deposited on the surface, soot deposited in the background may be removed and fingerprints may appear in the process of applying the soot removal technique. However, there is a limit to damaging the fingerprints that emerged in the process of removing soot.
This experiment finds an effective method of removing soot depending on the type of soot, and confirms the effect of depositing gold and zinc through the vacuum metal deposition (VMD) technique when fingerprints are damaged or removed during the removal process. The position of the fire was adjusted to induce dry soot and sticky soot on the surface. Subsequently, soot was removed by using a brush method, electrostatic dust printing lifters method, tape lifting method, 2% sodium hydroxide, and an ultrasonic cleaner. If the fingerprint was damaged or disappeared after soot removal, the VMD technique was applied.
As a result, in dry soot, the method of brushing off the soot with a brush neatly removed the soot and the contrast ratio between the fingerprint and the background was good. The electrostatic dust printing lifters method and the tape lifting method also effectively removed soot, but this was not the case when flexion existed due to the deposition of soot. In the sticky soot, a technique using 2% sodium hydroxide and an ultrasonic cleaner removed soot neatly compared to other techniques, but there was a problem in that fingerprints were not partially damaged or manifested. As a result of applying the VMD technique to samples, fingerprints could development, but the contrast ratio of the fingerprints was not good due to water stains.
It is difficult to determine whether the soot covered with evidence collected at the scene of the fire is dry or sticky. Therefore, it is necessary to first apply a non-destructive technique to minimize damage to the fingerprint. After removing the soot present on the surface through a brush, the soot that is not removed is neatly removed by placing it in an ultrasonic cleaner containing 2% sodium hydroxide. At this time, if the fingerprint is damaged, the damaged fingerprint may development if the VMD technique is applied.
분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)