Consistent dynamic model identification of the Stäubli RX-160 industrial robot using convex optimization method

다국어 초록 (Multilingual Abstract)

Dynamic models of robot manipulators with standard dynamic parameters are required for simulations, model-based controller design and external force estimation. The aim of this work is to identify the complete dynamic model of the 6-axis Stäubli RX-160 industrial robot. A convex optimization-based method is used for parameter identification. Consistent model parameters are obtained as the result of the optimization procedure subject to physical constraints. Low-speed behavior of the robot being dominated by joint friction, the dynamic model includes an algebraic friction model consisting of the Coulomb and viscous friction components along with the Stribeck effect. The coupled mechanical structure of the 5th and 6th joints, and elasticity due to the presence of balancing springs are also represented in the proposed dynamic model. The ordinary least square error method is used for the performance evaluation of the convex optimization-based method. Estimated parameters from both methods are experimentally verified over identification and test trajectories. The identified model is finally used as a basis in the estimation of external forces acting on the robot’s end-effector. The proposed sensor-less model-based approach for the estimation of external forces constitutes an alternative mean of experimental validation. Comparison of computed external forces with measured ones by an F/T transducer shows that the dynamic model obtained with the proposed method provides an accurate estimation.

참고문헌 (Reference)

• 1 R. E. Perez, "pyOpt: a python-based object-oriented framework for nonlinear constrained optimization" 45 (45): 101-118, 2012
• 2 F. Ficuciello, "Variable impedance control of redundant manipulators for intuitive human-robot physical interaction" 31 (31): 850-863, 2015
• 3 H. Jahandideh, "Use of PSO in parameter estimation of robot dynamics; part two: robustness" 1-6, 2012
• 4 K. K. Ahn, "System modeling and identification the two-link pneumatic artificial muscle (pam) manipulator optimized with genetic algorithms" 4744-4749, 2006
• 5 R. D. Al-Dabbagh, "System identification and control of robot manipulator based on fuzzy adaptive differential evolution algorithm" 78 : 60-66, 2014
• 6 J. Hollerbach, "Springer Handbook of Robotics" Springer 113-138, 2016
• 7 B. Siciliano, "Robotics:Modelling, Planning and Control" Springer Science & Business Media 2010
• 8 M. Linderoth, "Robotic force estimation using motor torques and modeling of low velocity friction disturbances" 3550-3556, 2013
• 9 C. D. Sousa, "Physical feasibility of robot base inertial parameter identification: a linear matrix inequality approach" 33 (33): 931-944, 2014
• 10 Y. Liu, "Parameter identification of collaborative robot based on improved artificial fish swarm algorithm" 1-7, 2020
• 11 F. Richter, "Open-sourced reinforcement learning environments for surgical robotics"
• 12 B. Armstrong, "On finding exciting trajectories for identification experiments involving systems with nonlinear dynamics" 8 (8): 28-48, 1989
• 13 M. Gautier, "Numerical calculation of the base inertial parameters of robots" 8 (8): 485-506, 1991
• 14 B. Bona, "Nonlinear friction estimation for digital control of direct-drive manipulators" 2685-2690, 2003
• 15 W. Khalil, "Modeling, Identification and Control of Robots" Butterworth-Heinemann 2004
• 16 Jinhui Wu, "Kinematic response of industrial robot with uncertain-but-bounded parameters using interval analysis method" 대한기계학회 33 (33): 333-340, 2019
• 17 C. D. Sousa, "Inertia tensor properties in robot dynamics identification: a linear matrix inequality approach" 24 (24): 406-411, 2019
• 18 J. Jovic, "Humanoid and human inertia parameter identification using hierarchical optimization" 32 (32): 726-735, 2016
• 19 S. Briot, "Global identification of joint drive gains and dynamic parameters of parallel robots" 33 (33): 3-26, 2015
• 20 H. Olsson, "Friction models and friction compensation" 4 (4): 176-195, 1998
• 21 M. Gautier, "Extended Kalman filtering and weighted least squares dynamic identification of robot" 9 (9): 1361-1372, 2001
• 22 J. Swevers, "Experimental robot identification using optimised periodic trajectories" 10 (10): 561-577, 1996
• 23 V. Mata, "Dynamic parameter identification in industrial robots considering physical feasibility" 19 (19): 101-119, 2005
• 24 W. Ge, "Dynamic parameter identification for reconfigurable robot using adaline neural network" 319-324, 2019
• 25 J. Jia, "Dynamic parameter identification for a manipulator with joint torque sensors based on an improved experimental design" 19 (19): 2248-2264, 2019
• 26 R. Waiboer, "Dynamic modelling, identification and simulation of industrial robots" University of Twente 2007
• 27 F. Pique, "Dynamic modeling of the da Vinci research kit arm for the estimation of interaction wrench" 1-7, 2019
• 28 C. Gaz, "Dynamic identification of the franka emika panda robot with retrieval of feasible parameters using penalty-based optimization" 4 (4): 4147-4154, 2019
• 29 T. Xu, "Dynamic identification of the KUKA LBR iiwa robot with retrieval of physical parameters using global optimization" 8 : 108018-108031, 2020
• 30 S. Wang, "Deep learning aided dynamic parameter identification of 6-DOF robot manipulators" 8 : 138102-138116, 2020
• 31 D. Dautbegovic, "Convex optimization methods for system identification" Linnaeus University 2014
• 32 B. Armstrong-Helouvry, "Control of Machines with Friction" Springer Science & Business Media 2012
• 33 A. Wahrburg, "Contact force estimation for robotic assembly using motor torques" 1252-1257, 2014
• 34 F. Glineur, "Conic optimization: an elegant framework for convex optimization" 41 (41): 5-28, 2001
• 35 W. Wu, "Closed-loop dynamic parameter identification of robot manipulators using modified Fourier series" 9 (9): 29-37, 2012
• 36 S. Diamond, "CVXPY: a python-embedded modeling language for convex optimization" 17 (17): 2909-2913, 2016
• 37 Stäubli Faverges, "Arm - RX Series 160 Family Instruction Manual"
• 38 G. Zak, "Application of the weighted least squares parameter estimation method to the robot calibration" 116 (116): 890-893, 1994
• 39 Y. Han, "An iterative approach for accurate dynamic model identification of industrial robots" 1577-1594, 2020
• 40 Y. Chen, "Adaptive fuzzy computedtorque control for robot manipulator with uncertain dynamics" 9 (9): 237-245, 2012
• 41 B. Armstrong-Hélouvry, "A survey of models, analysis tools and compensation methods for the control of machines with friction" 30 (30): 1083-1138, 1994
• 42 M. M. Olsen, "A new method for estimating parameters of a dynamic robot model" 17 (17): 95-100, 2001
• 43 Y. Wang, "A dynamic model identification package for the da Vinci research kit" 4 (4): 3657-3664, 2019