잎담배 생산기술의 현황과 전망 = Current Situation and Prospects of Tobacco Producing Technology in Korea
저자
석영선 (충북대학교 농과대학 연초학과)
발행기관
학술지명
권호사항
발행연도
2004
작성언어
Korean
주제어
KDC
520
자료형태
학술저널
수록면
13-26(14쪽)
제공처
우리나라 잎담배 생산의 특징은 조기재배를 위하여 저온기간에 비닐하우스내에서의 육묘와 피복재배를 하며, 영세하고 노동집약적인 소농구조이다. 그러나 국민경제의 급속한 성장에 따른 농촌구조의 변모, 젊은 농촌인구의 이동, 임금상승, 제조담배의 시장개방 등으로 많은 노동력을 필요로 하는 잎담배 생산산업은 극히 어려운 실정에 놓여 있다.
최근 육묘, 본포준비, 건조실 및 건조관리 등에서의 새로운 기술과 기계를 개발하여 많은 효과를 거두고 있으나 좀 더 생력적이고 체계적인 기계화가 필요하다. 재배과정별로는 직파에 의한 부상육묘 및 육묘장의 대형화, 이식준비작업의 일관화된 기계화, 다기능을 가진 본포관리용 종합관리기 개발, 건조실의 대형화 및 자동화, 대형포장의 산엽수매 등 작업의 기계화와 용이화로 생산성의향상을 도모하고, 경영합리화를 위하여 경지의 집단화 및 경지정리, 공동육묘 또는 육묘의 전문화, 퇴비생산의 지역별 공장화, 건조실의 집단화 또는 위탁건조, 건조엽의 저장 및 농기계관리의 공동화 등 공동경영시설로 전환하여야 할 것으로 생각된다.
잎담배 생산의 비용과 환경오염을 줄이면서 유해물질의 함량이 적은 잎담배를 생산하기 위한 주요 내용은 다음과 같다.
• 시비는 비료값이나 환경오염을 적게 하기 위하여 토양의 비옥도, 시비 전력 및 재배방법을 고려하여 시비량을 합리적으로 하여야 하며, 과다한 시비는 자원의 낭비는 물론 수질을 오염시키게 된다.
• 양질엽을 안정적으로 재배하기 위하여서는 제초를 철저히 하여야 하며, 최근 제초제를 많이 사용하고 있다. 제초제는 잡초의 종류와 후작의 작물을 고려하여 잘 선택하여 사용방법과 사용량을 적정하게 하여야 할 것이다.
• 경작기술의 발전으로 곁순의 생장도 커지는 경우가 많으며, 곁순억제제의 사용이 증가하고 있다. 곁순억제제는 접촉형과 침투성 두 가지가 이용되고 있는데 접촉형은 어린 곁순을 테워 죽이고 침투형은 세포분렬을 억제하는 것이다. 침투형인 MH는 1950년대 초에 도입되어 저렴하고 효과가 좋으며, 대체 물질이 아직까지 개발되지 않아 세계적으로 많이 사용되고 있으며 담배잎 중에 잔류량이 허용치보다 높은 경우가 있어 문제시 되고 있다. 유럽의 일부국가에서는 잔유량의 허용치를 80ppm으로 제한하고 있으며, 가까운 장래에 다른 국가에서도 허용치를 강화하여 적용할 것이므로 다른 농약과 더불어 잔류량을 적게 하여야만 할 것이다.
• 담배 재배 중에 발생하는 모든 병충해에 대한 방제방법은 다양하므로 이식 전에 포지별로 종합적인 방법을 수립하여야하며, 각 포지에 대한 병해의 발생정도에 대한 지도를 작성하여 방제 계획을 세우면 효과적이다. 병충해의 방제는 피해와 경비를 줄이면서 환경 오염을 적게 하여야 한다.
• 황색종 건조 중에 암 발생물질로 알려진 tobacco specific nitrosamines이 연소부산물과 결합하여 생성되는 것으로 밝혀져 있으므로 건조실내로 연소가스가 유입되지 않도록 건조실의 가열장치와 환기시설의 구조를 개선하여야 할 것이다.
The characteristics of tobacco productive circumstances can be summarized as widespread small scale farming, high labor practices, and pit-covered mulching cultivation. Rapid development of economic growth during the past few years has been largely increased farm wages as decrease of rural labors. Accompanying the labor problems have been a continual reducing of tobacco production. Much progress has been made in resent years in the development of new tools and techniques for all phase of tobacco production, from soil preparation to curing. The new developments should be considered both reducing labor and raising operational efficiency toward optimum levels.
The improvement of productivity should be effectively produced on mechanization and techniques by float system and direct-seeding of transplants in large greenhouse, integrate work of soil preparation, many-sided machinery for field management, large curing facilities, automation of curing management, and large package of tangled leaf. The management rationalization should be effectively produced on expanding farm size, reforming farm land, specializing the seedling production, manufacturing compost, and grouping the curing bam by contract farmers or encouraging group.
Below are some suggestions to reduce production cost, environment contamination and health concerns
•The efficient use of nutrients, including those in the soil naturally or as a result of previous fertilization and management practices, can help reduce fertilizer costs and environmental concerns without reducing yield or quality. This requires a well-planned fertilization program based on soil testing, wise selection of nutrient sources based on needs and costs, and proper application. Over-fertilization is expensive, wastes natural resources, and increases the potential for contamination of water resources.
• Herbicides can reduce the number of cultivations needed to produce a profitable, high-quality crop. There are advantages and disadvantages to each application time depending on the herbicide and weed population. The proper identification of weeds is essential for proper herbicide selection. Also, always read the label before purchasing a herbicide to see whether the product controls the problem weed, to determine the proper rate, and to be aware of rotational restrictions.
• Two primary types of chemicals are available for sucker control. Contact alcohol chemicals desiccate (bum) tender sucker tissue, while systemic chemicals retard sucker growth by inhibiting cell division. MH has saved many hours of labor since its introduction in the early 1950s. It is widely used for sucker control because it usually is effective, relatively inexpensive, and easy to apply. But high residues can reduce demand by domestic as well as export customers. No suitable alternative to MH has been developed, and sucker control programs without this product have not given consistently good results. Consequently, MH residues on and in cured tobacco are often higher than acceptable. Several members of the European Community have adopted an 80 ppm MH tolerance on tobacco products. This tolerance may be established by other countries in the near future. Therefor, it would be wise to assume that the MH residues on tobacco will very likely undergo even greater scrutiny and regulation soon.
• No one practice can be expected to provide protection from every disease, much less from the many different diseases that might attack tobacco during a growing season. Tobacco growers urgently need to assess the disease problems within each of their fields and plan management strategies well before the crop year. A tobacco disease map of each field can plan control practices that should benefit them immensely as they develop production plans from season to season. The real goal of pests management is not to kill pests but to reduce damage and maximize profits. Thus, it is not only necessary to protect the crop but also to keep the costs of protection as low as possible. It protects the environment and also saves money by reducing pesticide
• Recent research has shown that a class of carcinogenic (cancer-causing) compounds known as tobacco specific nitrosamines (TSNAs) may be formed in flue-cured tobacco leaves during the curing process. To prevent the combustion gases from contacting the tobacco do not allow exhaust fumes from burners, boilers, and other equipment to enter the curing chamber.
분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)