PCB내 1005 수동소자 내장을 이용한 Diplexer 구현 및 특성 평가 = The Fabrication and Characterization of Diplexer Substrate with buried 1005 Passive Component Chip in PCB

다국어 초록 (Multilingual Abstract)

Today lots of investigations on Embedded Passive Technology using materials and chip components have been carried out. We fabricated diplexers with 1005 sized-passives, which were made by burying chips in PCB substrate and surface mounting chip on PCB. 6 passive chips (inductors and capacitors) were used for the frequency divisions of $880\;MHz{\sim}960\;MHz(GSM)$ and $1.71\;GHz{\sim}1.88\;GHz(DCS)$. Two types of diplxer were characterized with Network analyzer. The chip buried diplexer showed extra 5db loss and a little deviation of 0.6GHz at aimed frequency areas, whereas the chip mounted diplexer showed man. 0.86dB loss within GSM field and max. 0.68dB within DCS field respectively. But few degradations were observed after $260^{\circ}C$ for 80min baking and $280^{\circ}C$ for 10sec solder floating.

참고문헌 (Reference)

• 1 "차세? SoP-L 공정기술 동향" 8 (8): 7-14, 2005년12월
• 2 Sawada, "The reliability of plastic ball grid array package" 15 (15): 35-39, 1998
• 3 "Recent advanced in Low CTE and High Density System-on-a-Package(SOP) Substrate with Thin Film Component Integration" 1357-1380, 2006
• 4 Lin, "Mechanics of interfacial delamination under hygrothermal stresses during reflow soldering" 163-169, 1997
• 5 "JPCA SHOW" CMK Booth, Tokyo 2005
• 6 이중근, "Dual band Antenna Switch Module의 LTCC 공정변수에 따른 안정성 및 특성 개선에 관한 연구" 한국마이크로전자및패키징학회 12 (12): 105-109, 2005