치과용 심미수복재료 세로모에서 수분흡수와 체적 변화에 관한 연구 = Dimensional Changes of Ceromer Crown by Water Absorption

다국어 초록 (Multilingual Abstract)

Statement of problem: The increasing demand for esthetic restorations has been required developing new materials for tooth colored restoration. Ceromer(Ceramic Optimized Polymer) has some advantages over porcelain, and has gained increasing popularity in restorative dentistry. However, there is little information on the dimensional changes in a clinical restoration in moist conditions. Purpose: This study examined the dimensional changes in Ceromer restorations with a clinical crown shape that were fabricated in a clinical manner. Material and methods: The crowns for the maxillary central incisor were fabricated with two Ceromers($BelleGlass^{(R)}$ and $Targis^{(R)}$) using a similar clinical restoration manufacturing technique. A total of twenty specimens were prepared and immersed in distilled water at room temperature to allow for water absorption. The weight, height and width were measured at 24, 72 and 168 hours. The accumulated ratios of the changes were calculated and evaluated using a paired t-test and an independent independent t-test. Results: The dimensions and weight increased with increasing soaking time. $Targis^{(R)}$ showed significant differences in height and weight between 24 hours and the other times(P<.05). $BelleGlass^{(R)}$ showed significant differences in width and weight between 24 hours and the other times. The two materials showed different changing patterns of the dimensions but there were no statistically significant differences between them. Conclusion: The dimensions and weight of the Ceromer restorations were changed by water absorption. The clinical crown shaped specimen showed more complicated dimensional changes than the simplified specimens.

참고문헌 (Reference)

• 1 장희원, "수종Ceromer의 변연적합도와 파절강도에 관한 비교 연구" 대한치과보철학회 43 (43): 438-452, 2005
• 2 McCabe JF, "Water absorption, dimensional change and radial pressure in resin matrix dental restorative materials" 25 : 4001-4007, 2004
• 3 Keyf F, "The weight change of various light-cured restorative Materials stored in water" 6 : 72-79, 2005
• 4 Feilzer AJ, "The influence of water sorption on the development of setting shrinkage stress in traditional and resin-modified glass ionomer cements" 11 : 186-190, 1995
• 5 Feilzer AJ, "Relaxation of polymerization recontraction shear stress by hygroscopic expansion" 69 : 36-39, 1990
• 6 Kim SJ, "Marginal fitness and marginal leakage of fiber-reinforced composite crowns depending upon luting cements" 38 : 618-630, 2000
• 7 Calais JG, "Influence of filler type and water exposure on flexural strength of experimental composite resins" 67 : 836-840, 1988
• 8 Segura A, "In vitro posterior composite polymerization recovery following hygroscopic expansion" 20 : 495-499, 1993
• 9 Martin N, "Hygroscopic expansion and solubility of composite restoratives" 19 : 77-86, 2003
• 10 Mohsen NM, "Hydrolytic stability of silanated zirconia silica-urathane" 22 : 213-220, 1995
• 11 Hirasawa T, "Harashima I, Aizawa M. Initial dimensional change of composites in dry and wet conditions" 62 : 28-31, 1983
• 12 Gohring TN, "Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite" 21 : 761-772, 2005
• 13 So ¨derholm KJ, "Degradation of glass filler in experimental composites" 60 : 1867-1875, 1981
• 14 ∅ysæd H, "Composites for use in posterior teeth: mechanical properties tested under dry and wet conditions" 20 : 261-271, 1986
• 15 Draughn RA, "Composite materials, in: Restorative dental materials- an overview, vol. 1." FDI 75-107, 1985
• 16 van Noort R, "Chapter 2.2 Resin composites and polyacidmodified resin composites. Introduction to dental materials. 2nded" Mosby 96-123, 2002
• 17 Trushkowsky RD, "Ceramic optimized polyer: the nest gen eration of esthetic restorations-Part 1" 18 : 1101-1106, 1997
• 18 Musanje L, "Aspects of water sorption from the air, water and artificial saliva in resin composite restorative materials" 19 : 414-422, 2003