치과용 복합레진으로 수리된 CAD-CAM hybrid 수복물의 전단결합강도 = Shear bond strength of dental CAD-CAM hybrid restorative materials repaired with composite resin

다국어 초록 (Multilingual Abstract)

Purpose: This study was performed in order to assess the effect of the surface treatment methods and the use of bonding agent on the shear bond strength (SBS) between the aged CAD-CAM (computer aided design-computer aided manufacturing) hybrid materials and added composite resin. Materials and methods: LAVA Ultimate (LU) and VITA ENAMIC (VE) specimens were age treated by submerging in a $37^{\circ}C$ water bath filled with artificial saliva (Xerova solution) for 30 days. The surface was ground with #220 SiC paper then the specimens were divided into 9 groups according to the combination of the surface treatment (no treatment, grinding, air abrasion with aluminum oxide, HF acid) and bonding agents (no bonding, Adper Single Bond 2, Single Bond Universal). Each group had 10 specimens. Specimens were repaired (added) using composite resin (Filtek Z250), then all the specimens were stored for 7 days in room temperature distilled water. SBS was measured and the fractured surfaces were observed with a scanning electron microscope (SEM). One-way ANOVA and Scheffe test were used for statistical analysis (${\alpha}=.05$). Results: Mostly groups with bonding agent treatment showed higher SBS than groups without bonding agent. Among the groups without bonding agent the groups with aluminum oxide treatment showed higher SBS. However there was no significant difference between groups except two subgroups within LU group, which revealed a significant increase of SBS when Single Bond Universal was used on the ground LU specimen. Conclusion: The use of bonding agent when repairing an aged LAVA Ultimate restoration is recommended.

참고문헌 (Reference)

• 1 이영곤, "상아질 표면 거칠기, 자가부식 접착제, 결합강도, 다이아몬드 포인트, 카바이드 버, SiC paper" 대한치과보존학회 35 (35): 13-19, 2010
• 2 Ozcan M, "The use of chairside silica coating for different dental applications: a clinical report" 87 : 469-472, 2002
• 3 Stawarczyk B, "Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD/CAM resin nanoceramic" 19 : 299-308, 2015
• 4 Daniels MW, "Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxysilane-modified colloidal silica coatings" 205 : 191-200, 1998
• 5 Flores S, "Repairability of polyacid-modified composite resin" 20 : 191-196, 1995
• 6 Amaral R, "Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning" 22 : 283-290, 2006
• 7 Lauvahutanon S, "Mechanical properties of composite resin blocks for CAD/CAM" 33 : 705-710, 2014
• 8 Ru ME, "Influence of artificial saliva contamination on bonding of dentin adhesives to dentin" 17 : 383-397, 1992
• 9 Ozcan M, "Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations" 30 : 194-203, 2003
• 10 Egilmez F, "Effect of surface modification on the bond strength between zirconia and resin cement" 22 : 529-536, 2013
• 11 Hisamatsu N, "Effect of silane primers and unfilled resin bonding agents on repair bond strength of a prosthodontic microfilled composite" 29 : 644-648, 2002
• 12 Brosh T, "Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites" 77 : 122-126, 1997
• 13 Swift EJ Jr, "Effect of a silane coupling agent on composite repair strengths" 7 : 200-202, 1994
• 14 Kim HC, "Ceramic materials for chair side CAD/CAM" 23 : 16-26, 2014
• 15 Frankenberger R, "Adhesive luting of new CAD/CAM materials" 18 : 9-20, 2015
• 16 Frankenberger R, "Adhesive luting of new CAD/CAM materials" 18 : 9-20, 2015
• 17 Rocca GT, "A technique to improve the esthetic aspects of CAD/CAM composite resin restorations" 104 : 273-275, 2010
• 18 Kang HS, "A study on the bond strength of repair resin to the surface treated composite resins" 20 : 487-507, 1995
• 19 Lee CW, "A study on microleakage of composite resin after surface treatment" 25 : 103-115, 1998
• 20 Jong-YeopLee, "A shear bond strength of resin cements bonded to pressable porcelain with various surface treatments" 대한치과보철학회 41 (41): 379-, 2003
• 21 He LH, "A novel polymer infiltrated ceramic for dental simulation" 22 : 1639-1643, 2011
• 22 Kurbad A, "A new, hybrid material for minimally invasive restorations in clinical use" 16 : 69-79, 2013