절리 영속성이 사각 단면 지하공동에서의 사면체 블록 형성에 끼치는 영향 = Effect of Joint Persistence on the Formation of Tetrahedral Block Inside an Underground Opening

국문 초록 (Abstract)

지하공동 굴착현장에서 관찰되는 절리분포 양상에 대한 자료를 기반으로 굴착과정에서 형성될 수 있는 사면체 블록의 형상, 규모 및 붕락 가능성을 절리 영속성을 고려하여 예측하는 수치해석 기법을 개발하였다. 절리 영속성 분석결과를 이용하여 절리면의 확장성에 따른 개착면에서의 표출정도 및 블록형성 가능성 해석을 수행하는 기능을 고안하여 기존에 개발된 결정론적 3차원 블록해석모델에 접목시켰다. 개선된 수치해석모델의 신뢰성을 고찰하기 위하여 실제 블록 붕락이 발생된 굴착현장에 대한 해석을 수행하였다. 조사된 절리분포 양상에 의거하여 대표 방향성을 설정하고 잠재적 블록 형성을 분석하여 붕락된 블록 형상에 부합된 해석 결과를 도출하였으며, 이에 근거하여 굴착과정에서의 붕락 진행 미캐니즘을 블록형상을 고려하여 고찰하였다.

다국어 초록 (Multilingual Abstract)

A numerical analysis model capable of predicting the shape, the size and the potentiality of collapse of tetrahedral blocks considering the persistence obtained from the field survey of joint distribution around the underground excavation surface has been developed. Numerical functions of analyzing both the exposed trace distribution on the excavation surface and the formation of tetrahedral block controlled by the extent of joint surface have been established and linked to the previously developed three dimensional deterministic block analysis model. To illustrate the reliability of advanced numerical model the case of underground excavation in which the collapse of rock block had practically taken place was studied. Representative orientations of joint sets was determined based on the joint distribution pattern observed on the excavation surfaces. The formation of block on the roof of underground opening was analyzed to unveil the potential tetrahedral block the shape of which was very similar to the collapsed rock block. Mechanisms of collapse process has been also analyzed by considering the three dimensional shape of tetrahedral block.

목차 (Table of Contents)

• Abstract
• 초록
• 1. 서론
• 2. 불연속면의 영속성
• 3. 영속성을 고려한 3차원 블록해석모델
• 4. 굴착현장의 블록 붕락 해석
• 5. 결론
• References

참고문헌 (Reference)

• 1 Cho T. F., "Three-dimensional deterministic block analysis model for information-oriented excavation design" 55 : 63-70, 2012
• 2 Priest S. D, "The use of inclined hemisphere projection methods for the determination of kinematic feasibility, slide direction and volume of rock blocks" 17 : 1-23, 1980
• 3 Einstein H. H., "The effect of discontinuity persistence on rock slope stability" 20 (20): 227-236, 1983
• 4 Barton N., "Strength, deformation and conductivity of rock joints" 22 (22): 121-140, 1985
• 5 Warburton P. M, "Stereological interpretation of joint trace data: influence of joint shape and implication for geological surveys" 17 : 306-316, 1980
• 6 Baecher G. B., "Statistical description of rock properties and sampling" 5C1-1-5C1-8, 1977
• 7 Song J. J., "Stability analysis of rock blocks around a tunnel using a statistical joint modeling technique" 16 : 341-351, 2001
• 8 Lajtai E. Z, "Shear strength of weakness planes in rock" 6 : 499-515, 1969
• 9 Brady B.H.G, "Rock Mechanics for Underground Mining" Kluwer Academic Publishers 2004
• 10 Baecher G. B, "Progressively censored sampling of rock joint traces" 12 (12): 33-40, 1980
• 11 Pollard D, "Progress in understanding jointing over the past century" 100 : 1181-1204, 1988
• 12 Villaescusa E, "Maximum likelihood estimation of joint size from trace length measurements" 25 : 67-87, 1992
• 13 Arfken G., "Mathematical methods for physicists" Academic Press 1970
• 14 Priest S. D, "Estimation of discontinuity spacing and trace length using scanline surveys" 18 : 183-197, 1981
• 15 조태진, "Discontinuity Orientation Measurement (DOM) 시추장비 및 코어절리 해석모델 개발" 한국암반공학회 13 (13): 33-43, 2003
• 16 Chern J.C, "Computing 3-D key blocks delimited by joint traces on tunnel surfaces" 30 (30): 1599-1604, 1993
• 17 Goodman R.E., "Block Theory and its application to rock engineering" Prentice-Hall 1985
• 18 Menendez-Diaz A., "Analysis of tetrahedral and pentahedral key blocks in underground excavations" 36 : 1009-1023, 2009