초기재령에서 각종 혼합콘크리트의 염소이온 고정화능력에 관한 연구

국문 초록 (Abstract)

본 연구에서는 보통포틀랜드시멘트(OPC: ordinary Portland cement), 플라이애쉬(PFA: pulverised fly ash), 고로슬래그미분말(GGBFS: ground granulated blast furnace slag), 실리카퓸(SF: Silica fume)등의 각종 결합재를 적용한 시멘트 페이스트의 염소이온 고정화능력에 관하여 연구하였다. 각각의 사용 시멘트 페이스트는 40%의 물/결합재로 PFA, GGBFS 및 SF 혼화제의 각기 다른 치환률을 갖도록 하였으며 미리 혼합수내에 결합재 중량당 0.1~0.3%의 염소이온을 배합수내에 혼입 포함시켜 배합되어 제조되었다. 염소이온의 측정은 7일간 양생 후 수분 추출 방법을 이용하여 측정하였다. 실험을 통해 염소이온 고정화 능력이 결합재 종류 및 치환률에 의존하고 있음을 확인하였고, 총 염소이온량의 증가는 염소이온 고정화능력을 제한하여 결론적으로 염소이온 고정화를 감소시키고 있음을 보였다. 본 연구에서 최대 30%의 치환율을 가진 PFA와 60%의 치환률을 가진 GGBFS의 경우는 OPC보다 염소이온고정화 능력이 작았으며, SF의 치환률의 증가는 고정화를 감소시키고 있음을 확인하였으며, 이는 포졸란계 재료의 잠재 수화반응 혹은 공극수의 pH 저하등의 이유로 판단된다. 재령 7일에서의 염소이온의 고정화능력은 염해부식에 대한 저항성으로 나타내어지며, 염분을 혼입한 경우의 고정화능력의 순서는 30%PFA > 10%SF > 60%GGBFS > OPC로 나타났다. 더욱이 염소이온의 고정화 거동은 Langmuir isotherm 및 Freundlich isotherm으로 잘 표현될 수 있음을 보였다.

다국어 초록 (Multilingual Abstract)

This paper studies the early-aged chloride binding capacity of various blended concretes including OPC(ordinary Portland cement), PFA(pulversied fly ash), GGBFS(ground granulated blast furnace slag) and SF(silica fume) cement paste. Cement pastes with 0.4 of a free water/binder ratio were cast with chloride admixed in mixing water, which ranged from 0.1 to 3.0% by weight of cement and different replacement ratios for the PFA, GGBFS and SF were used. The content of chloride in each paste was measured using water extraction method after 7 days curing. It was found that the chloride binding capacity strongly depends on binder type, replacement ratio and total chloride content. An increase in total chloride results in a decrease in the chloride binding, because of the restriction of the binding capacity of cement matrix. For the pastes containing maximum level of PFA(30%) and GGBFS(60%) replacement in this study, the chloride binding capacity was lower than those of OPC paste, and an increase in SF resulted in decreased chloride binding, which are ascribed to a latent hydration of pozzolanic materials and a fall in the pH of the pore solution, respectively. The chloride binding capacity at 7 days shows that the order of the resistance to chloride-induced corrosion is 30%PFA > 10%SF > 60%GGBFS > OPC, when chlorides are internally intruded in concrete. In addition, it is found that the binding behaviour of all binders are well described by both the Langmuir and Freundlich isotherms.

참고문헌 (Reference)

• 1 Mohammed, T.U., "between free chloride and total chloride contents in concrete" 33 : 1487-1490, 2003
• 2 Hansson, C.M., "The threshold concentration of chloride in concrete for initiation of reinforcement corrosion;In: Corrosion Rates of Steel in Concrete" ASTM 3-16, 1988
• 3 Glass, G.K., "The presentation of the chloride threshold level for corrosion of steel in concrete" 39 : 1001-1013, 1997
• 4 Xu, Y., "The influence of sulphates on chloride binding and pore solution chemistry" 27 : 1841-1850, 1997
• 5 Page, C.L., "The influence of different cements on chloride-induced corrosion of reinforcing steel" 16 : 79-86, 1986
• 6 Glass, G.K., "The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete" 42 : 329-344, 2000
• 7 Ann, K.Y., "The influence of calcium nitrite on the initiation of chloride-induced corrosion of steel in concrete;n: Concrete under Sever Condition" Consec 287-296, 2004
• 8 Suryavanshi, A.K., "The binding of chloride ions by sulphate resistant Portland cement" 25 : 581-592, 1995
• 9 Sandberg, P., "Studies of chloride binding in concrete exposed in a marine environment" 29 : 473-477, 1999
• 10 Sandberg, P., "Studies of chloride binding in concrete exposed in a marine environment" 29 : 473-477, 1999
• 11 ASTM C 1218, "Standard test method for water-soluble chloride in mortar and concrete American Society for Testing and Materials"
• 12 Song, H. W., "Service life prediction of concrete structures under marine environment considering coupled deterioration" 12 (12): 265-284, 2006
• 13 Glass, G.K., "Reinforced concrete-The principles of its deterioration and repair ; In Modern Matters-Principles and Practice in Conserving Recent Architecture" Donhead Publishing 101-112, 1996
• 14 Neville, A.M., "Properties of Concrete" Longman Group Ltd 1995
• 15 Glass, G.K., "Process for the protection of reinforcement in reinforced concrete" 2001
• 16 Byfors, K., "Pore solution expression as a method to determine the influence of mineral additives on chloride binding" 16 : 760-770, 1986
• 17 British Standard 8110, "Part 1. Structural use of concrete - Code of practice for design and construction"
• 18 Glass, G.K., "Neural network modelling of chloride binding" 49 : 323-335, 1997
• 19 Suryavanshi, A.K., "Mechanism of Friedel's salt formation in cements rich in tri-calcium aluminate" 26 : 717-727, 1996
• 20 Lambert, P., "Investigations of reinforcement corrosion.2.Electrochemical monitoring of steel in chloride-contaminated concrete" 24 : 351-358, 1991
• 21 Breit, W., "Investigation on the threshold value of the critical chloride content;In: 4th CANMET/ACI Conference on Durability of Concrete" ACI 363-372, 1997
• 22 Arya, C., "Factors influencing chloride-binding in concrete" 20 : 291-300, 1990
• 23 Song, H. W., "Factors influencing chloride transport in concrete structures exposed to a marine environment" 30 : 113-121, 2008
• 24 Hussain, S.E., "Factors affecting threshold chloride for reinforcement corrosionin concrete" 25 : 1543-1555, 1995
• 25 Arya C., "Effect of cement type on chloride binding and corrosion of steel in concrete" 25 : 893-902, 1995
• 26 Page, C.L., "Diffusion of chloride ions in hardened cement pastes" 11 : 395-406, 1981
• 27 Sergi, G., "Diffusion of chloride and hydroxyl ions in cementitious materials exposed to a saline environment" 44 : 63-69, 1992
• 28 Dhir, R.K., "Development of chloride-resisting concrete using fly ash" 78 : 137-142, 1999
• 29 Song, H. W., "Development of chloride binding capacity in cement pastes and the influencing of the pH of hydration products" 2008
• 30 Hussain, S.E., "Corrosion resistance performance of fly ash blended cement concrete" 91 : 264-273, 1994
• 31 Glass, G.K., "Corrosion inhibition in concrete arising from its acid neutralisation capacity" 42 : 1587-1598, 2000
• 32 Thomas Telford, "Condensed Silica Fume in Concrete: State of Art Report" FIP 1988
• 33 Song, H. W., "Chloride threshold value for steel corrosion in concrete considering the buffering capacity against a fall in the pH" 2008
• 34 Song, H.W., "Chloride threshold level for steel corrosion in concrete" 49 : 4113-4133, 2007
• 35 Tritthart, J., "Chloride binding: “II The influence of the hydroxide concentration in the pore solution of hardened cement paste on chloride binding" 19 : 683-691, 1989
• 36 Song, H. W., "Chloride binding isotherms in cement paste containing various binders" 109-114, 2006
• 37 Dhir, R.K., "Chloride binding in GGBS concrete" 26 : 1767-1773, 1996
• 38 Delagrave, A., "Chloride binding capacity of various hydrated cement paste systems" 6 : 28-35, 1997
• 39 Ann, K.Y., "Build-up of surface chloride and its influence on corrosion initiation time of steel in concrete" 265-274, 2006
• 40 Arya, C., "Assessment of simple methods of determining the free chloride ion content of cement paste" 17 : 907-918, 1987
• 41 Ary, C., "An assessment of four methods of determining the free chloride content of concrete" 23 : 319-330, 1990