KCI등재
치과용 심미수복재의 중합수축 및 열팽창에 관한 연구 = A Study on the Polymerization Shrinkage and Thermal Expansion of Dental Esthetic Restorative Materials
저자
이용근 (서울대학교 치과대학 치과생체재료학 교실) ; 윤태호 (서울대학교 치과대학 치과생체재료학 교실) ; 김철위 (서울대학교 치과대학 치과생체재료학 교실)
발행기관
학술지명
대한치과재료학회지(THE JOURNAL OF THE KOREA RESEARCH SOCIETY FOR DENTAL MATREIALS)
권호사항
발행연도
2000
작성언어
Korean
주제어
KDC
515.12
등재정보
KCI등재
자료형태
학술저널
발행기관 URL
수록면
171-179(9쪽)
제공처
Polymerization shrinkage results in contraction stresses within the material, which can cause mechanical failure at the composite/tooth interface. Difference of the coefficient of thermal expansion between teeth and restorative materials can result in marginal gap and percolation. In this experiment, eight kinds of light curing composite resins and two kinds of compomers were studied. Polymerization shrinkage for ten minutes at 15℃ isothermal temperature was measured with a thermal dilatometer (DIL 402C, TASC 414/3A Controller, Netzche, Germany), and the possibility of this method as a routine shrinkage test was evaluated. Then the coefficient of thermal expansion of these samples was measured between 25∼55℃. Materials were condensed into a clear plastic straw of 10∼12㎜ in length and 3㎜ in inner diameter, and were placed into the measuring part of dilatometer under the compression of 30cN. The specimen was stabilized thermally and mechanically for one minute, and 400㎽/㎠ of blue light (Visilux 2, 3M, U.S.A.) was irradiated for two minutes. The amount of polymerization shrinkage for nine minutes was recorded, and compared by material and time after irradiation. Linear coefficient of thermal expansion (a) was measured with reusing the parallel ground polymerization shrinkage specimen, and the a value was calculated at the interval of five degrees.
Over 80% of polymerization shrinkage occurred within one minute after irradiation, and after three minutes of irradiation the dimension of specimen was stabilized with very small change. The amount of linear polymerization shrinkage after nine minutes from the start of irradiation was 2.224∼8.282㎛/㎜ in composite resin, and 4.558∼6.463㎛/㎜ in compomer. The a value of composite resins in the range of 25∼55℃ was 23.090℃37.882×10-6/℃, and that of compomer was 15.515∼31.995×10-6/℃. The a value increased as the temperature increased in the 25∼50℃ range; however the value decreased significantly in the range of 50∼55℃.
분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)