전기방사법에 의해 제조된 폴리우레탄 나노섬유의 수산화알루미늄 내첨에 의한 내염화 특성 향상 = Enhanced Flame Resistant Properties of Aluminum Hydroxide Addition on Electrospun Polyurethane Nanofibers

국문 초록 (Abstract)

본 논문에서는 내산화성 및 난연성이 향상된 폴리우레탄 나노섬유를 전기방사법 및 수산화알루미늄 내첨을 통해 제조하였다. 전기방사 조건은 인가전압: 20 kV, 폴리머 용액 유량: 1.2 ml/h, 롤러 속도: 120 rpm 및 롤러와 주사기 팁의 거리: 15 cm의 공정변수에서 최적의 조건을 확인하였다. 폴리우레탄 섬유의 내산화성 및 난연성을 향상시키기 위하여, 수산화알루미늄을 전기방사 시 내첨하였다. 제조된 샘플의 열적 특성을 평가하기 위하여 열중량분석기(thermogravimetricanalysis, Shimadzu, TGA-50H)를 사용하였다. 또한 관련 분석을 통해 고분자 분해 온도(polymer decompositiontemperature), 적분열분해 진행온도(integral procedure decomposition temperature), 최종 분해 온도(final decompositiontemperature) 및 열분해 후 잔여량 등을 분석하였다. 그리고 분해 반응의 속도론적 고찰을 위해 Horowitz-Metzger 적분식을 통해 활성화 에너지를 해석하였다. 수산화알루미늄의 내첨에 의해, 분해 활성화 에너지가 50% 이상 증가함을 확인하였다. 이는 수산화알루미늄이 300~500 oC에서 열분해함에 따라 수화반응에 의해 폴리우레탄 나노섬유의 열분해 저항성이 커지기 때문인 것으로 파악된다.

다국어 초록 (Multilingual Abstract)

Anti-oxidation and flame resistant polyurethane nanofibers were prepared by electrospinning and aluminum hydroxideaddition. Electrospinning was carried out under the following procedure conditions; applied voltage, 20 kV; polymer solutionfeeding rate, 1.2 ml/h; collector rolling speed, 120 rpm; and tip to collector distance, 15 cm. Aluminum hydroxidewas added to the prepared polymer solution for electrospinning to enhance the oxidation and flame resistant properties.
The thermal properties were investigated by thermogravimetric analysis to determine the polymer decomposition temperature,integral procedure decomposition temperature, final decomposition temperature, and remaining amount after thermaldecomposition. The activated energy for polymer degradation was also investigated using the Horowitz-Metzgerequation. The activation energy increased to more than 50%. The thermal properties of the polyurethane nanofibers wereimproved by a hydration reaction during the thermal decomposition of aluminum hydroxide around 300~500 oC.

참고문헌 (Reference)

• 1 D. J. Johnson, "The Fine Structure of Graphitized Fibers" 2 : 787-795, 1969
• 2 Z. Shen, "The Effects of Carbon Nanotubes on Mechanical and Thermal Properties of Woven Glass Fibre Reinforced Polyamide-6 Nanocomposites" 69 : 239-244, 2009
• 3 Y. Sekiguchi, "Structure and Formation of Cellulosic Chars" 28 : 3513-3525, 1983
• 4 S. W. Benson, "Some Unresolved Problems in Oxidation and Combustion" 12 : 223-228, 1979
• 5 van Krevelen D. W., "Some Basic Aspects of Flame Resistance of Polymeric Materials" 16 : 615-620, 1975
• 6 정민정, "Nitrogen and hydrogen adsorption of activated carbon fibers modified by fluorination" 한국공업화학회 15 (15): 410-414, 2009
• 7 T. Kashiwagi, "Nanoparticle Networks Reduce the Flammability of Polymer Nanocomposites" 4 : 928-933, 2005
• 8 S. Liodakis, "How to Measure the Particle Ignitability of Forest Species by TG and LOI" 477 : 16-20, 2008
• 9 A. D. Cato, "Flow Behavior of Mesophase Pitch" 41 : 1411-1417, 2003
• 10 X. Huang, "Fabrication and Properties of Carbon Fibers" 2 : 2369-2403, 2009
• 11 C. D. Doyle, "Estimating Thermal Stability of Experimental Polymers by Empirical Thermogravimetric Analysis" 33 : 77-79, 1961
• 12 P. K. Baumgarten, "Electrostatic Spinning of Acrylic Microfibers" 36 : 71-79, 1971
• 13 O. P. Bahl, "Characterization of Oxidized Pan Fibers" 12 : 417-423, 1974
• 14 L. H. Peebles, "Carbon Fibers: Formation Vol. 3" CRC Press 1995
• 15 J. B. Donnet, "Carbon Fibers" Marcel Dekker 1-85, 1998
• 16 J. B. Donnet, "Carbon Fibers" Marcel Dekker 12-27, 1984
• 17 G. Rodrigues da Silva, "Biodegradation of Polyurethanes and Nanocomposites to Non-cytotoxic Degradation Products" 95 : 491-499, 2010
• 18 J. H. Choy, "Alum and Hydroxide Routes to α-Al2O3 (II) Ultrafine Alumina by Thermal Decomposition" 35 : 422-426, 1991
• 19 Z. M. Huang, "A Review on Polymer Nanofibers by Electrospinning and Their Applications in Nanocomposites" 63 : 2223-2253, 2003