임계열유속에 대한 임계전류밀도의 상사특성 = Analogous characteristics of critical current density with critical heat flux
저자
발행기관
학술지명
권호사항
발행연도
2022
작성언어
-주제어
KDC
001
자료형태
학술저널
수록면
3-29(27쪽)
제공처
임계열유속은 원자력발전소의 설계 및 안전과 관련된 매우 중요한 인자이다. 복잡한 수력학적 조건에서의 임계열유속 측정실험은 극한의 실험조건에 의한 실험설비의 파손 시 발생하는 경제적, 시간적 소요에 의해 연구자들로 하여금 많은 어려움을 겪게 한다. 본 연구는 이러한 임계열유속 측정의 난점을 극복하기 위해 열과 물질전달 간의 상사성을 이용한 대체가능 실험방법론을 제시한다. 임계전류밀도는 작업전극에 수소막이 덮이면서 나타나는 전기분해에서의 작동한계이다. 본 연구에서는 임계열유속과 임계전류밀도의 수력학적 유사성을 기반으로, 임계열유속에 대한 임계전류밀도의 상사특성을 탐구한다. 비등계에서의 기화현상을 모사하기 위해 묽은황산전기분해계를 사용하여 전기화학적으로 수소를 발생시키는 실험을 수행하였다. 예비실험으로써, 수소환원계의 핵생성특성을 측정하고 이를 비등계와 비교하였다. 비등계에서와 유사하게, 전류밀도가 증가하면 수소환원계의 활성핵생성밀도(Active nucleation site density)가 증가하였다. 반면, 비등계에서와는 반대로 수소기포의 이탈직경은 전류밀도에 따라 감소하였다. 결과적으로, 수소기포의 주기는 전류밀도에 따라 증가하였다. 임계전류밀도의 메커니즘을 밝히기 위해 기존 임계열유속 모형을 차용하고 이를 수소환원계에 활용가능한 형태로 수정하였다. 기존 비등계의 Dry spot 모형과 유사한 개념으로 ‘Insulation spot’ 모형을 개발하여 임계전류밀도에서의 수소기포배열을 평가하였다. 임계기포수가 6개인 경우 Insulated spot 모형에 의한 임계전류밀도는 측정된 임계전류밀도보다 7.4% 높은 값을 산출해내며 잘 예측한다. 본 연구에서 최초로 수소환원계에서의 Macrolayer가 확인되었다. 수소기포덩어리의 Hovering time과 Macrolayer의 두께를 활용한 기존 Macrolayer dryout 모형은 임계전류밀도 또한 4.37% 이내로 잘 예측한다. 이러한 결과는 임계열유속에서와 마찬가지로 임계전류밀도 또한 수력학적 거동이 지배적으로 작용함을 의미한다. 그러므로, 수소환원계의 작은 수소기포이탈직경을 고려하면 임계전류밀도는 임계열유속의 축소모형이라고 간주할 수 있겠다. 이러한 상사관계를 여러 기하학적 및 수력학적 조건으로 확장할 수 있다. 질량유량, 표면기울기, 도관의 크기 등에 대한 임계전류밀도의 영향은 임계열유속에서의 영향과 유사하게 나타남을 확인하였다. 본 연구에서 밝혀진 상사특성을 통해, 열과 물질전달 간의 상사성을 이상유동 현상의 범위로 확장함으로써 더욱 진보된 상사성을 확립할 수 있다.
더보기The critical heat flux (CHF) is one of the important design and safety parameters in the nuclear power plant. The measurements of the CHF for complex hydrodynamic conditions are difficult due to the extreme experimental conditions, which cause the failure of the test facility, resulting in financial and time demanding problems. The present study proposes a possible alternative experimental method to overcome the difficulty of the CHF experiment by extending the analogy relation between heat and mass transfers. The critical current density (CCD) is an operation limit in the water electrolysis when hydrogen film is formed on the working electrode. Based on the hydrodynamic similarities between the CHF and the CCD, analogous characteristics of the CCD with the CHF are explored. Dilute sulfuric acid electrolysis was employed to produce hydrogen gas, which simulates vaporization in the boiling system. As the preliminary investigation, the nucleation characteristics of the hydrogen evolving system are measured and compared with the boiling system. The active nucleation site density in the hydrogen evolving system increased with current density increased, similar to the boiling system. The hydrogen departure diameter decreased with the increased current density as opposed to the boiling system. Accordingly, the hydrogen bubble frequency increased as the current density increased. The existing CHF models are borrowed and customized to envisage the CCD mechanism. The hydrogen bubble configuration at the CCD is estimated by the ‘insulated spot model’, which is developed in a similar manner to the dry spot model in the boiling system. The CCD is predicted well when the critical number of bubbles is six, which yields 7.4% higher value than the measured one. The presence of the macrolayer in the hydrogen evolving system is firstly revealed in this study. The macrolayer dryout model also predicts the CCD within 4.37% by utilizing the thickness of macrolayer and hovering time of hydrogen mass. The results imply that the CCD is dominated by the hydrodynamic behaviors just like the CHF. Hence, the CCD can be regarded as a miniature CHF considering small bubble diameter of the hydrogen evolving system. The analogous relations are extended by applying to the various geometric and hydrodynamic conditions. It is confirmed that the influences of mass flux, surface inclination, channel gap size, etc on the CCD are similar to those on the CHF. The analogous characteristics proven in this study shed light on the improved analogy between heat and mass transfers by extending the scope to include the two-phase flow phenomenon.
더보기분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)