초고강도 강섬유 보강 콘크리트의 인장강도와 압축강도 사이의 상관관계에 관한 연구

국문 초록 (Abstract)

최근 RPC를 활용한 초고강도 콘크리트가 개발되면서 100 MPa 이상의 높은 압축강도를 보유한 콘크리트가 취성적 파괴의 방지 목적과 인장강도 증진을 위해 강섬유를 혼입하여 사용되고 있다. 따라서 인장강도의 결정이 중요하나, 현재 초고강도 콘크리트 영역에서의 인장강도 추정을 위한 연구결과가 산발적으로만 이루어지고 있는 상황이다. 따라서 본 연구에서는 80~200 MPa의 압축강도를 보유한 RPC의 재료 시험을 수행하여 압축강도와 인장강도의 상관관계를 검토하였다. 시험 결과 100 MPa 이상의 압축강도를 보유할 경우에도 보통강도 또는 고강도 콘크리트 영역에서의 변화 경향이 유지되고 있는 것을 확인할 수 있었다. 이에 기존 연구로부터 수집된, 쪼갬인장강도 원주형 공시체 시험 결과 284개와 265개의 파괴계수 시험 결과를 활용하여 기존의 추정식들을 평가하였다. 평가 결과 100 MPa 이상의 초고강도 콘크리트에서는 기존 추정식을 안전하게 사용하기 어려운 것을 확인하였으며, 100 MPa 이상의 초고강도 콘크리트에도 적용 가능한 회기식을 도출하였다.

다국어 초록 (Multilingual Abstract)

Ultra-high strength concrete which have 100 MPa compressive strength or higher can be developed applying RPC(Reactive Powder Concrete). Preventing brittle failure under compression and tension, ultra-high strength concrete usually use the steel fibers as reinforcements. For the effective use of steel fiber reinforced ultra-high strength concrete, estimation of tensile strength is very important. However, there are insufficient research results are available with no relation between them. Therefore, in this study, correlation between compressive strength and tensile strength of ultra-high strength concrete was investigated by test and statistical analysis. According to test results, increasing tendency of tensile strength was also shown in the range of ultra-high strength. Evaluation of test results of this study and collected test results were carried out. Using 284 splitting test specimens and 265 flexural test specimens, equations suggested by previous researchers cannot be applied to ultra-high strength concrete. Therefore, using database and test results, regression analysis was carried out and we suggested new equation for splitting and flexural tensile strength of steel fiber reinforced ultra-high strength concrete.

목차 (Table of Contents)

• ABSTRACT
• 1. 서론
• 2. 섬유보강 고강도 콘크리트의 인장강도
• 3. 초고강도 강섬유보강콘크리트의 기계적 성질
• 4. Database를 통한 인장강도의 추정
• 5. 결론
• References
• 요약

참고문헌 (Reference)

• 1 오영훈, "갈고리형 강섬유를 혼입한 보통 및 고강도 콘크리트의 휨강도 평가" 콘크리트학회 논문집 20 (4) : 531 ~ 539 , 2008
• 2 Narayanan, R., "Use of Steel Fibers as Shear Reinforcement" ACI Structural Journal 84 (3) : 216 ~ 227 , 1987
• 3 Nageh, N., Meleka, "Ultra High Strength Concrete Using Economical Materials" International Journal of Current Engineering and Technology 3 (2) : 393 ~ 402 , 2013
• 4 Ramadoss, P., "Tensile Strength and Durability Characteristics of High-Performance Fiber Reinforced Concrete" The Arabian Journal for Science and Engineering 33 (2B) : 307 ~ 319 , 2008
• 5 Gettu, R., "Study of the distribution and orientation of fibers in SFRC specimens" Materials and Structures 38 : 31 ~ 37 , 2005
• 6 Ahmad, S. H., "Structural properties of high strength concrete and its applications for precast prestressed concrete" PCI Journal 30 (6) : 97 ~ 123 , 1985
• 7 Mansur, M. A., "Steel fibre reinforced concrete beams in pure torsion" The International Journal of Cement Composites and Lightweight Concrete 4 (1) : 39 ~ 45 , 1982
• 8 M. Daniel Vanderbilt, "Shear strength of continuous plates" Journal of the Structural division, Proceedings of the ASCE : 961 ~ 973 , 1972
• 9 Yen Lei Voo, "Shear Strength of Steel Fiber-Reinforced Ultrahigh-Performance Concrete Beams without Stirrups" Journal of Structural Engineering 136 (11) : 1393 ~ 1400 , 2010
• 10 Kwak, Y. K., "Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups" ACI Structural Journal 99 (4) : 530 ~ 538 , 2002
• 11 M. A. Mansur, "Shear Strength of Fibrous Concrete Beams Without Stirrups" Journal of Structural Engineering 112 (9) : 2066 ~ 2079 , 1986
• 12 J. A. Ramirez, "Shear Reinforcement Requirements for High-Strength Concrete Bridge Girders, Joint Transportation Research Project : 127 ~" 2005
• 13 Carrasquillo, R. L., "Properties of high strength concrete subjected to short-term load" ACI Journal 78 (2) : 171 ~ 178 , 1981
• 14 Zaina, M. F. M., "Prediction of splitting tensile strength of high-performance concrete" Cement and Concrete Research 32 : 1251 ~ 1258 , 2002
• 15 Francis Oluokun, "Prediction of Concrete Tensile Strength from its Compressive Strength: an Evaluation of Existing Relations for Normal Weight Concrete" ACI Materials Journal 88 (3) : 302 ~ 309 , 1991
• 16 Magureanu, C., "Physical and mechanical properties of ultra high strength fiber reinforced cementitious composites" Proceedings of FraMCoS-7 : 23 ~ 28 , 2010
• 17 "NZS3101, NZS 3101:2006, Concrete Structures Standard" Standards New Zealand : 232 ~ ,
• 18 Ramadoss, P., "Modeling for the evaluation of strength and toughness of high performance fiber reinforced concrete" Journal of Engineering Science and Technology 7 (3) : 280 ~ 291 , 2012
• 19 Song, P. S., "Mechanical properties of high-strength steel fiber-reinforced concrete" Construction and Building Materials 18 : 669 ~ 673 , 2004
• 20 Job Thomas, "Mechanical Properties of Steel Fiber-Reinforced Concrete" Journal of Materials in Civil Engineering 19 (5) : 385 ~ 392 , 2007
• 21 Hisham M. Al-Hassani, "Mechanical Properties of Reactive Powder Concrete (RPC) with Various Steel Fiber and Silica Fume Contents" Eng. & Tech. Journal 31 (16) : 3090 ~ 3108 , 2013
• 22 Faisal F. Wafa, "Mechanical Properties of High-Strength Fiber Reinforced Concrete" ACI Material Journal 89 (48) : 449 ~ 455 , 1992
• 23 Mokhtarzadeh, A., "Mechanical Properties of High-Strength Concrete with Consideration for Precast Applications" ACI Materials Journal 97 (2) : 136 ~ 148 , 2000
• 24 Benjamin A. Graybeal, "Material Property Characterization of Ultra-High Performance Concrete : 176 ~" 2006
• 25 "KS F 2423, Standard test method for splitting strength of concrete" Korean Agency for Technology and Standards : 1 ~ 12 , 2011
• 26 "KS F 2408, Standard test method for flexural strength of concrete" Korean Agency for Technology and Standards : 1 ~ 9 , 2010
• 27 "KS F 2405, Standard test method for compressive strength of concrete" Korean Agency for Technology and Standards : 1 ~ 16 , 2010
• 28 Nguyen Minh Long, "Investigation of Fracture Properties of Steel Fiber Reinforced Concrete" The 3rd ACF International Conference : 854 ~ 861 , 2008
• 29 Khayat, K., "High-strength concrete properties derived from compressive strength values" Cement Concrete and Aggregates 17 (2) : 126 ~ 133 , 1995
• 30 van Jijl, G. P. A. G., "HPFRCC 6 : 59 ~ 66" 2008
• 31 Wasan, I. Khalil, "Flexural Strength of Fibrous Ultra High Performance Reinforced Concrete Beams" ARPN Journal of Engineering and Applied Sciences 8 (3) : 200 ~ 214 , 2013
• 32 Arunachalam. K., "Experimental investigation on ultra high strength concrete containing mineral admixtures under different curing conditions" International Journal of Civil and Structural Engineering 2 (1) : 33 ~ 42 , 2011
• 33 Shende, A. M., "Experimental Study on Steel Fiber Reinforced Concrete for M-40 Grade" International Refereed Journal of Engineering and Science 1 (1) : 43 ~ 48 , 2012
• 34 Kaiss F. Sarsam, "Experimental Investigation of Shear-Critical Reactive Powder Concrete Beams withoutWeb Reinforcement" Eng.&Tech. Journal 30 (17) : 2999 ~ 3022 , 2012
• 35 A. Ramachandra Murthy, "Evaluation of mechanical properties for high strength and ultrahigh strength concretes" Advances in Concrete Construction 1 (4) : 341 ~ 358 , 2013
• 36 Celik Ozyildirim, "Evaluation of Ultra-High-Performance Fiber-Reinforced Concrete : 20 ~" 2011
• 37 Nihal Arιoglu, Z., "Evaluation of Ratio between Splitting Tensile Strength and Compressive Strength for Concretes up to 120 MPa and its Application in Strength Criterion" ACI Materials Journal 103 (1) : 18 ~ 24 , 2006
• 38 Burg, R. G., "Engineering Properties of Commercially Available High-Strength Concretes : 55 ~" 1992
• 39 Antoine, E. Naaman, "Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites" Journal of Advanced Concrete Technology 1 (3) : 241 ~ 252 , 2003
• 40 Korea Concrete Institute, "Concrete Design Code and Commentary" Kimoondang Publishing Company : 600 ~ , 2007
• 41 Avraham N. Dancygier, "Bond between deformed reinforcement and normal and high-strength concrete with and without fibers" Materials and Structures 43 : 839 ~ 856 , 2010
• 42 Dawood Abdulhai Pandor, "Behavior of High Strength Fiber Reinforced Concrete Beams in shear" Massachusetts institute of technology , 1994
• 43 Maher, K., Tadros, "Application of Ultra-High Performance Concrete to Bridge Girders : 76 ~" 2009
• 44 "ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary" American Concrete Institute : 391 ~ , 2011
• 45 "ACI 363. Report on high strength concrete : 1 ~ 65" 2010