교정용 선재의 직경 증가를 위한 전기도금법과 무전해도금법의 비교연구 = A Comparative Study of Electroplating and Electroless Plating for Diameter increase of Orthodontic Wire
The purpose of this study was to evaluate electroless plating as a method to increase diameter of an orthodontic wire through comparison with eletroplating.
After pretreatment for plating to the stainless steel orthodontic wire of 0.016 inch. the electoless plating was done under the condition of 90'c until the diameter of the wire was increased to 0.018 inch using Hessonic-Gr® which was sold by Shin-Pung metal. On the process of electroless plating the diameter of wire was measured every 5 minute to examine the increasing ratio of the wire's diameter per time unit. And to examine the uniformity, the diameter of each 3 points of the electroless-plated orthodontic wire was measured. An X-ray diffraction test was performed to analyze the nature of the plated metal and physical property test was made. Through the comparison with electroplating, following results were obtained.
1. In stiffness. yield strength, and ultimate strength of electroless plating wire group showed higher tendency than those of electroplated wire group, and in stiffness and ultimate strength there was statistically significant difference between two groups.
2. In the electroless plating wire group. the increasing ratio of the diameter was 0.O0461±0.00003 mm/5min (0.O0092 mm/min). In the electroplated wire group, that was 0.O0821±0.O0015 mm/min.
3. The results of uniformity test to measure the diameter of each 3 points showed a tendency of uniformity in all the two plating method.
The results of this study suggest that the electroless plating wire is more close to the ready-made wire than electroplating wire in terams of the physical property. On the other hand. the length of plating time should be solved for the clinical application of electroless plating.
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)