KCI등재
연구논문 : 실험고고학을 통해 본 영산강유역 옹관의 제작 기술에 대한 연구-성과와 과제를 중심으로- = Research on the Production Technology of Jar Coffins in the Yeongsan River Basin from the Perspective of Experimental Archaeology-About Performance and Task-
저자
발행기관
학술지명
권호사항
발행연도
2013
작성언어
Korean
주제어
KDC
905.000
등재정보
KCI등재
자료형태
학술저널
수록면
87-131(45쪽)
제공처
영산강유역의 고대사회를 이해함에 있어 가장 중요한 키워드를 꼽으라고 하면 ‘옹관(甕棺)’을 들 수 있다. 기존에 영산강유역 옹관에 대해서는 고고학·역사학·자연과학적 측면에서 다양한 방식으로 연구되어 왔다. 하지만 옹관이 지니고 있는 기술적 측면에 대한 심도 있는 논의가 제대로 이루어지 않아 옹관이 지니고 있는 정치사회적 의미를 제대로 파악하기는 더더욱 어려웠다. 무엇보다도 크기가 2m에 달하는 옹관을 어떻게 만들었고, 무덤까지 운반한 지에 대해서는 막연한 추측에서 논의가 이루어질 뿐 세밀한 검토는 거의 이루어지지 못하였다. 이에 영산강유역의 옹관에 대한 제작 기술을 복원하기 위한 본격적인 시도로 국립나주문화재연구소는 2008년부터 『대형옹관제작 고대기술 복원 프로젝트』 사업을 추진해 오고 있다. 이 사업은 영산강유역의 U자형 전용옹관에 대한 제작기술을 고고학적 조사 및 연구뿐만 아니라 자연과학적 분석과 실험고고학적 연구를 함께 융합하여 추진하여 왔다. 특히 옹관에 대한 ‘자료수집 및 분석’+‘고고학적 발굴조사(옹관가마 및 고분)’+‘자연과학적 분석’을 토대로 하여 ‘모의실험→태토조성 및 배합실험→성형실험→가마 제작 및 복원 실험→소성실험’의 과정으로 2008년부터 2012년에 걸쳐 총 5회의 제작실험을 실시하였다. 그리고 매 회 실험에 대한 결과를 ‘고고학적 발굴조사+자연과학적 분석’에 환류시켜 검증하고 이런 결과를 종합적으로 정리하고 평가 및 진단하여 후속 실험을 추진하였다. 이런 방식은 기존의 옹관, 더나나아 실험고고학적 연구와 차별화된 시도로 평가받고 있다. 그동안의 옹관에 대한 제작실험을 통하여 영산강유역의 옹관을 제작하기 적합한 태토, 성형기법을 비롯한 제작 기술 공정을 복원하였다. 옹관 태토는 구릉성 산지의 기저부에 퇴적된 점토에 풍화석영이 10~30% 혼입되어 있어야 한다. 그리고 옹관은 점토띠를 3~4단 올린 후에 건조시킨 후에 다시 올려 쌓아 저부를 먼저 만든 후에 뒤집어서 거치대에 올린 후에 동체 및 구연부를 쌓아 올리는 방식(도치후 정치성형)이 실제 옹관에서 나타나는 분할성형흔, 손누름흔, 타날흔 등을 가장 잘 보여주는 기법으로 밝혀졌다. 그리고 옹관 가마는 지하로 130~140cm 땅을 파고 나무나 띠풀 등 식물 재료를 새끼줄로 엮어 골격을 만든 후에 볏짚을 섞은 진흙을 올려 가마의 아궁이를 포함한 연소부를 제외하고 지붕을 만들었다. 이어서 한달 이상 건조한 옹관을 옹관편이나 모래 등으로 받쳐 재임한 후에 아궁이를 만들어서 가마를 마무리를 하였다. 옹관의 색상은 소성온도[중저화도(900℃이하), 고화도(900~1,200℃)] 및 방식(산화소성, 환원소성), 태토에 따라 적갈색·회백색(중저화도 산화소성)·회청색(중저화도·고화도 환원소성)을 나타내고, 흑반은 소성온도(중저화도)와 재임방식(모래받침, 토광받침)에 의하여 다양한 형태를 띠고 있다. 다음으로 영산강유역 옹관의 제작기술을 실험고고학적으로 복원함에 있어 다각적인 조사 및 연구방법론을 결함함으로써 한국의 실험고고학적 연구방법론에 새로운 방안을 제시하여 주었다. 이를 통해 영산강유역 옹관고분사회를 좀더 입체적으로 조망할 수 있게 되었다. 그러면서도 영산강유역 옹관에 대한 제작실험을 추진하는 과정에서 문제점과 한계도 엄연하게 존재한다. 제작실험의 횟수가 좀 더 늘어나야 할 뿐만 아니라 외부환경이 통제되지 않은 상태, 예를 들어 나주 오량동 옹관 가마터에서 제작실험이 이루어져야 한다. 그리고 옹관 원료산지에 대한 체계적인 검토와 함께 U자형 전용옹관 이외에 선행기옹관으로 제작실험을 넓혀 나가야 한다. 또한 제작실험을 수행하는 방식인 고고학자와 옹기 장인의 협업체계를 개선해야 하고, 세계의 토기 제작 방식에 대한 민족지자료의 활용도를 높여야 하며, 제작실험 과정에서 일반인들의 참여를 높여 대중고고학의 지평을 확대해 나가야 한다. 이상으로 영산강유역의 U자형 전용옹관에 대한 실험고고학적 연구는 융복합연구를 기초로 한 연구라는 점에서 상당히 의미 있는 도전이면서 주목할 만한 성과를 학계에 내놓았다. 앞으로는 기존 실험을 보완하면서 옹관의 유통과 활용의 측면에서 다각적인 실험을 통하여 옹관고분사회의 기술문화상을 넘어 사회문화상까지 복원해 나갈 예정이다.
더보기Jar Coffins is one of the most important keywords in understanding the ancient society created near Yeongsan River. It has been studied in various ways from the archaeological, historical and natural scientific aspects. However, its technological aspect has not been researched in depth; therefore it has been difficult to figure out its sociopolitical significance properly. In particular, it has been vaguely assumed how 2 m tall jar coffins were made and transported to ancient tomb without any detailed review. The Naju National Research Institute of Cultural Heritage has executed the research project for restoring the technology used in making ancient big jar coffins since 2008. The project includes archaeological investigation and research, natural scientific analysis and experimental archaeological research on the U-shape jar coffins found in the Yeongsan River Basin. Based on the data collection and analysis, archaeological excavation (jar coffin kiln and ancient tomb) and natural scientific analysis, the institute has conducted five times of production experiments from 2008 to 2012 and the following is the experiment process; mock-up experiment → raw material composition and mix → coiling a clay → kiln production and restoration → firing jar coffins. The result of each experiment was verified through the feedback to the archaeological excavation and natural scientific analysis and the results were integrated and organized and evaluated and diagnosed for the follow-up experiments. This method was differentiated from the existing research on jar coffins and further existing archaeological researches. So far, the method of production experiment on jar coffins has been used to restore the production technology and processes including raw material suitable for making jar coffins and coiling clay. The raw material should be composed of 10 -30 % of weathered quartz and clay deposited at the bottom of hill. And it has been found out that the production method (piling up three or four layers of lay bands, drying and upbuilding again to make the bottom, turning upside down and putting it on a support and making body and mouth on it, Jeongchi after Dochi Forming) most clearly shows the traces of separation forming (the traces left when clay bands are separated and piled up), the traces of hand pressuring (the traces left when clay bands were pressed by hands) and the pounding traces. And to make jar coffin kiln, people dig 130-140m into the ground and in order to make the roof part except for furnace and firing place, plant materials such as trees or miscanthus sinensis are used to make straw rope for the structure and the mud mixed with straw is covered on the structure. And the completed structure should be dried for more than one month on broken jar coffin pieces or sands and the furnace is made on the structure as the last step. The color of jar coffin could differ from firing temperature (low temperature below 900℃), high temperature (900 - 1,200℃) and firing methods (oxidizing firing, reduction firing) and raw materials. Red brown, grayish white (mid-low temperature and oxidizing firing), grayish blue (low temperature firing, high temperature firing) and the black spots show different shapes according to firing temperature (mid-low temperature) and supporting methods (on sand or digging the earth). The combination of multidimensional investigation and research methodologies in restoring jar coffin production technology in the Yeongsan River Basin presents a new idea to the experimental archaeology world. It presents more multidimensional perspective on the jar coffin society in the Yeongsan River Basin. However, there have been issues and limitations in the experiment process. The number of experiments should increase and the experiment should be conducted in the condition where the outside environment is not controlled, such as in Naju Oryang-dong kiln site. In addition, the origin of raw materials should be systematically reviewed and the experiment should be expanded to include earlier jar coffins other than U-shaped jar coffins. And the experiment process that archaeologists and jar coffins masters cooperate should be improved and the ethnography on earthenware production methods around the world should be utilized further. And the public engagement in the experiment should increase in order to enlarge the horizon of the public archaeology. The research on u-shaped jar coffin found in the Yeongsan River Basin was a significant challenge and has presented very noteworthy result to the academic society as it is based on convergence research. It is expected to improve the existing experiment methods and restore socio-cultural aspects of the jar coffin society beyond technological aspects through multi dimensional research on circulation and utilization of jar coffins.
더보기분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)