KCI등재
제조물책임법 활성화 방안에 관한 연구 ― 현행법의 한계와 개선안 마련을 중심으로 ― = A Study on Activation of Product Liability Law ― Focusing on Limits of Current Law and Improvement Plans ―
저자
발행기관
학술지명
권호사항
발행연도
2020
작성언어
-주제어
등재정보
KCI등재
자료형태
학술저널
수록면
145-187(43쪽)
DOI식별코드
제공처
소장기관
우리나라의 제조물책임법은 2002년 시행된 때로부터 약 19년이 지났으나 그 활용도는 낮고 제조물책임법 조항을 직접 적용한 판시도 많지 않다. 제조물책임법을 활성화하여 입법목적을 달성하기 위해서는 법 제정 당시부터 가지고 있는 문제를 개선해야 할 필요가 있다. 우선, 사람과 사물, 사물과 사물 등이 서로 연결되는 초연결 사회에서 소프트웨어가 갖는 중요성은 더욱 커질 것이고 이러한 현실에서 제조물책임법상 제조물의 범위에 소프트웨어를 배제하는 것은 바람직하지 않다. 법 정책적으로 소프트웨어의 제조물성을 명시적으로 인정하는 법 개정이 필요하다.
또한 우리 제조물책임법은 EC 입법지침과 미국 제3차 리스테이트먼트를 혼용하여 결함개념을 혼합적으로 정의하였는데, 이는 무과실책임 원칙인 제조물책임법의 성격을 혼란스럽게 하고 피해자에게 과도한 증명책임을 부담하게 하므로 타당하지 않다. 미국의 유형적 결함개념은 엄격책임주의, 징벌적 손해배상제도 및 집단소송제도 등 소비자에게 유리한 환경에서 제조물책임소송의 폭증으로 기업의 파산과 보험 인수거부 등이 사회문제가 되자 소비자와 제조업자 간 형평을 기하기 위해 도입된 개념이므로 제조물책임법 활용이 낮은 우리나라에서 그대로 도입할 실익이 크지 않다. EC 입법지침과 같이 통일적 개념으로 수정하고 소비자 기대 기준에 따라 제조물의 결함 유무를 판단하는 것이 피해자 보호에 바람직하다.
제조물책임법 개정을 통해 신설된 결함추정 요건의 완화규정은 여전히 피해자에게 과중한 증명의 부담으로 작용한다. 우리 제조물책임법상 현재의 엄격한 증명책임 완화 요건(제조업자의 실질적 지배영역, 결함과 손해 간 통상적 인과관계)을 보다 완화하여 소비자가 정상적인 방법으로 제조물을 사용하였을 때 발생한 사고의 경우에는 제조물에 결함이 있다고 추정하되, 제조업자가 제조물의 결함이 아닌 다른 원인에 의해 손해가 발생하는 것을 입증하면 추정을 복멸시키는 방안을 고려할 수 있다.
한편, 정부에 의해 입법예고된 집단소송법은 소송절차에서 원고의 주장ㆍ증명책임을 경감하는 특례 규정 및 소송 전 증거조사절차를 도입하여 피해자 보호의 측면이 강화되었다. 집단소송법이 도입될 경우 제조물책임법의 활성화와 피해자 보호에 긍정적인 효과를 가져올 것으로 보이고, 원고의 주장책임 경감이나 자료 등 제출명령의 특례는 제조물책임법에도 해단 내용을 신설하여 개인 피해자 보호를 강화할 필요가 있다.
마지막으로 상법개정안에 담긴 징벌적 손해배상제도의 내용이 제조물책임법의 그것보다 피해자에게 유리하게 규정되어 있다. 상법 개정을 통해 징벌적 손해배상제도가 확대 적용되면 제조물책임법 제3조 제2항을 어떻게 처리해야 할지 문제 되는데, 개정된 상법 규정의 내용에 맞춰 제조물책임법 제3조 제2항을 개정하는 것이 타당하다고 생각한다. 왜냐하면, 상법이 우선 적용된다고 하더라도 제조물책임법이 보충적으로 적용되는데, 손해배상액 결정 시 상법에 없는 고려요소가 제조물책임법에 규정되어 있으므로 제조물책임법 조항을 수정하여 존치할 실익이 있기 때문이다.
About 19 years have passed since the enactment of the Product Liability Law of Korea in 2002. However, the law has been underutilized and there have been few court precedents that cite or invoke the Product Liability Law. In order to increase the applicability of the Product Liability Law, it is necessary to first solve the very problems that the legislators were hoping to solve with the enactment of the Law. First, in this hyperconnected society where humans and things are connected, software has become more important than ever. Given the current environment, it is undesirable to exclude software from the scope of product. Software should be expressly included in the definition of product and therefore a subject of the Product Liability Law.
While the definition of product liability under the Korean Law is based on both the definitions from the EC Legislative Guidance and the Restatement of the Law (Third) of the U.S., the Korean definition confuses the characteristics of the ‘no negligence principle’ of the product liability laws and places heavy burden of proof on the claimants which is not reasonable. In the U.S. the concept of tangible defect was introduced in an attempt to ease the heavy burden on the companies where the introduction of strict liability, punitive damage and class action lawsuit all fueled the surge of the number of product liability lawsuits resulting in many companies for filing bankruptcy and not being able to obtain insurance policy. As such, it is not fair to introduce the same concept that was designed to ease the burden of the companies to Korea as is. Therefore, it appears more appropriate in protecting the consumers to adopt the EC Legislative Guidance model under which the product liability is determined based on the standards that are expected from the consumers.
The new provision adopted under the amendment to the Product Liability Law reliving the presumption of defect still places heavy burden of proof on the part of the consumers. Therefore, it may be necessary to relieve the strict burden of proof (that under the actual control of manufacturer, casual relationship between defect and the loss in the ordinary course) principle of the current provision so that there should be presumption of defect for accidents occurring while the product was in use by the consumer in the ordinary course unless the manufacturer is able to rebut that presumption with a proof that the loss was incurred for causes other than the defect.
On the other hand, the class action lawsuit legislation will be introduced contained special provision that minimizes the burden of proof on the part of the plaintiffs during the course of the case and the pre-trial procedure of analyzing evidence are expected to ease the burden of the consumers. If enacted, the class action law will help revitalize the Product Liability Law and positive impact on consumer protection. The special provisions reliving the burden of proof on the consumer and invoking the court order mandating submission of materials should also be added into the Product Liability Law to better protect individual consumers.
Lastly, the punitive damage regime contained in the proposed amendment to the Commercial Act is more favorable to consumers than the provision in the Product Liability Law. Upon the passage of the amendment which will expend the applicability of the punitive damage provision under the Commercial Act, the discussion then will be on what to do with Section 2 of Article 3 of the Product Liability Law. This paper argues that Section 2 of Article 3 of the Product Liability Law should also be modified in line with the proposed amendment to the Commercial Act. This is because even though the Commercial Act will take precedent, the Product Liability Law contains provisions that concern with matters that are not dealt in the Commercial Act, and therefore, it would be necessary to have the Product Liability Law revised to serve its intended purpose for the good of the society.
분석정보
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)