KCI등재
섬유판(纖維板)의 증강(增强)사이즈제(齊)가 재질(材質)에 미치는 영향(影響) = Effect of Strength Increasing Sizes on the Quality of Fiberboard
저자
신동소 ; 이화형 ; Shin, Dong So ; Lee, Hwa Hyoung
발행기관
학술지명
권호사항
발행연도
1976
작성언어
Korean
등재정보
KCI등재
자료형태
학술저널
수록면
19-29(11쪽)
제공처
소장기관
습식(濕式) 경질섬유판(硬質纖維板) 제조(製造)를 위(爲)한 보강용(補强用) 사이징제(劑)로서 실험실(實驗室) 제조(製造) 석탄산수지(石炭酸樹脂), 요소수지(尿素樹脂)(음(陰)이온 형(型), 양(陽)이온 형(型)), 요소(尿素) 메라민 공축합수지(共縮合樹脂)와 일본(日本) M사(社)의 변성(變性)메라민수지(樹脂)(P-6100)와 변성(變性) 양(陽)이온형(型) 요소수지(尿素樹脂)(P-1500)등을 사용(使用)하여 섬유판(纖維板) 재질(材質)에 미치는 영향(影響)을 검토(檢討)하였다. 공시재(供試材)는 라왕(20%)+소나무(80%)로 사용(使用)하였고 침착제(沈着劑)는 황산알미늄을 사용(使用)하였으며 열압조건(熱壓條件)은 전기가열(電氣加熱) 푸레스로 $180^{\circ}C$, $50-6-50kg/cm^2$, 시간(時間)은 1-2-7분(分)으로 S-1-S 경질섬유판(硬質纖維板)을 제조(製造)하여 일주일 기건(氣乾)시킨 후(後) 그 성질(性質)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 섬유판(纖維板)의 비중(比重)은 각(各) 보강제(補强劑)의 처리량(處理量)에 따른 비중(比重)의 차(差)는 없으나 보강제(補强劑) 간(間)에는 고도(高度)의 유의차(有意差)가 있어 변성(變性)메라민수지(樹脂)가 제일 높고 양(陽)이온형(型), 음(陰)이온형(型) 및 요소(尿素) 메라민 공축합수지(共縮合樹脂)가 중간(中間)이며 석탄산수지(石炭酸樹脂)가 제일 낮았다. 2. 섬유판(纖維板)의 함수율(含水率)은 보강제(補强劑) 간(間)의 차(差)와 보강제(補强劑) 처리량(處理量)에 따른 함수율(含水率)의 차(差)가 전부(全部) 유의성(有意性)이 있었으며 전체적(全體的)으로 처리량(處理量)이 증가(增加)할 수록 함수율(含水率)은 떨어지나 2%와 3% 처리(處理) 간(間)의 함수율(含水率) 차(差)는 없었다. 3. 섬유판(纖維板)의 흡수율(吸水率)은 보강제(補强劑) 간(間) 및 파라핀 왁스유탁액(乳濁液) 처리량(處理量) 간(間) 모두 다 유의차(有意差)를 보이고 있다. 파라핀 왁스유탁액(乳濁液) 처리량(處理量)을 늘일수록 흡수율(吸水率)은 떨어져 내수성(耐水性)이 증가(增加)함을 보이고 있으며 P-6100 및 P-1500은 무처리(無處理)에도 표준규격(標準規格)을 만족시켜 주며 음(陰)이온형(型) 요소수지(尿素樹脂), 양(陽)이온형(型) 요소수지(尿素樹脂), 요소(尿素) 메라민 공축합수지(共縮合樹脂)의 산(酸)콜로이드는 내수제(耐水劑)를 1% 요구하고 석탄산수지(石炭酸樹脂)는 2%에 합격(合格)되고 있었다. 4. 섬유판(纖維板)의 곡강도(曲强度)는 보강제(補强劑) 간(間) 및 보강제(補强劑) 처리량(處理量) 간(間)에 모두 유의차(有意差)가 있으며 처리량(處理量)이 증가(增加)할 수록 곡강도(曲强度)는 증가(增加)하였다. P-6100이 가장 곡강도(曲强度)가 높고 P-1500, 양(陽)이온형(型) 및 음(陰)이온형(型) 요소수지(尿素樹脂), 요소(尿素) 메라민 공축합수지(共縮合樹脂)의 산(酸)콜로이드등(等)이 중간(中間)이며, 석탄산수지(石炭酸樹脂)가 곡강도(曲强度)는 제일 낮았다. 5. 섬유판(纖維板)의 품질(品質)과 경제적(經濟的)인 면(面)을 고려한다면 석탄산수지(石炭酸樹指)의 대체(代替)로서 산(酸)콜로이드 방법(方法)에 의한 요소(尿素) 메라민 공축합수지(共縮合樹脂)와 양(陽)이온형(型) 요소수지(尿素樹脂)를 사용(使用)하는 것이 가장 바람직하며 이들 변성수지(變性樹脂)에 대(對)한 개선(改善) 연구(硏究)가 계속 필요(必要)하다 하겠다.
더보기The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.
더보기서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)