Seismic Performance of RC Moment Frames Retrofitted with Internal or External Steel Frames
저자
발행사항
서울 : 서울대학교 대학원, 2019
학위논문사항
학위논문(석사)-- 서울대학교 대학원 : 건축학과 2019. 8
발행연도
2019
작성언어
영어
주제어
DDC
690 판사항(22)
발행국(도시)
서울
기타서명
끼움강재골조 및 외부강재골조로 보강된 철근콘크리트 골조의 내진 성능
형태사항
xii, 152 p. : 삽화, 표 ; 26 cm
일반주기명
참고문헌 수록
UCI식별코드
I804:11032-000000158076
소장기관
As the awareness of the possibility of earthquake in Korea increases, interest in the seismic retrofit design of existing reinforced concrete structures with non - seismic details is increasing. Various seismic retrofitting methods have been developed for school buildings which have non-seismic details. In the case of old school buildings, however, it is difficult to find an appropriate retrofitting method for the existing structure because it is very poor in concrete strength and construction quality as well as having non-seismic details.
The retrofitting methods of the school building to increase the strength and stiffness of the structure are commonly used lately. Retrofitting RC frame with external steel moment frame and internal steel moment frame are widely used, which are constructed in longitudinal direction of school building. Since the existing RC columns are not continuously reinforced with the internal steel moment frame, however, the steel frame changes the load transfer mechanism and increases the total load acting on the structure.
In this study, to verify the seismic performance of the retrofitting method, five two-story frame specimens were tested under cyclic lateral loading. To verify the test results, a frame analysis model was proposed and the predicted strength and failure modes according to the elastic analysis were compared with test results. In addition, shear connection methods were developed and verified by shear test.
The test results showed that the proposed retrofit method significantly increase the stiffness and strength of the RC moment frame. In the internal steel frame specimen, the maximum strength was reached due to the shear failure of the 1st story column and it was three times greater than that of RC frame without steel frame. The ductility capacity decreased slightly compared to the non - retrofitted frame but showed good energy dissipation due to yielding of retrofitted steel frame. The maximum load of external steel frame specimens decreased due to flexural crushing at the bottom of the 1st-story column. The deformation capacity was better but the energy dissipation was smaller than that of internal steel frame specimens.
An analytical model consisting of line elements was proposed for the retrofitting structure design in practice and the analysis results were compared with the test results. Connection elements of analytical models were considered for shear and compressive behavior for internal-retrofitting and tensile, compressive and shear behavior for external-retrofitting. In the linear structure analysis result, the ordinary RC moment frame showed flexural failure of the 2nd-story beam while the result did not match the actual failure mode due to poor anchorage of rebars in beam-column joints. In case of internal-retrofitting, the analytical model showed shear failure of the 1st-story tensile column and it was consistent with the test result. The external-retrofitting model also showed failure of the 1st-story columns due to the crushing of concrete.
In this study, experiments on two story and one bay RC moment frames retrofitted with internal or external steel frame were carried out to verify the seismic performance of the retrofitting methods to RC frames with non-seismic details. Based on the results of the experiment, the analytical model for RC frame was proposed. The results of the elastic analysis were compared to the test results to confirm the suitability of the design for the proposed model, and the design concept for the steel-retrofitted frame system was proposed.
국내 지진발생 가능성에 대한 인식이 증가함에 따라 비내진상세를 가진 기존 철근 콘크리트 구조체의 내진보강설계에 대한 관심도 증대되고 있다. 특히 비내진상세를 가진 학교 건물에 대한 다양한 내진보강공법이 개발되어 왔으나, 오래된 학교 건물의 경우 기존 구조체가 비내진상세를 가지는 것 뿐만 아니라 콘크리트 강도, 시공 품질 등에서 매우 열악하여 이에 맞는 적절한 보강법을 찾기란 매우 어렵다.
최근 이러한 학교 건물에 대하여 기존 구조체의 강도와 강성을 증가시켜 내진성능을 확보하는 강도증가공법이 많이 사용되고 있으며, 특히 장방향으로 취약한 학교 건물의 특성을 고려해 기존 골조 면외에 강재 골조를 설치하는 외부강재골조 공법과 면내에 액자 형태의 철골프레임을 설치하는 끼움강재골조 공법이 많이 사용되고 있다. 그러나 끼움강재골조는 기존 골조의 기둥이 연속적으로 보강되지 않으므로 기존의 하중 전달경로와 분포를 변화시키고 구조물에 작용하는 전체 하중을 증가시키므로 기존 골조의 파괴가 선행되어 의도한 보강 효과를 얻을 수 없는 경우가 많다. 따라서 본 연구에서는 정적반복횡가력 실험을 통하여 기존 철근콘크리트 골조에 외부강재골조 보강법과 끼움강재골조 보강법을 적용한 보강 골조에 대한 내진성능을 평가하고, 실험결과와 탄성 해석에 따른 예상 강도 및 파괴모드의 적합성을 검토하였다. 또한 보강강재골조를 기존 구조체에 접합시키는 접합 공법의 구조 성능에 대한 연구가 선행되었다.
제안된 외부강재골조와 끼움강재골조로 보강된 골조의 내진성능을 평가하기 위하여, 실물대와 유사한 2층-1경간 골조에 대하여 반복횡가력실험을 수행하였다. 실험결과 무보강 골조는 보 주근의 부적절한 정착 상세로 인하여 2-3층 보-기둥 접합부에서 전단파괴가 발생하였다. 끼움강재골조로 보강된 골조는 1층 기둥의 휨 항복 이후 기둥 중앙의 전단파괴로 하중이 감소하였고, 무보강 골조 대비 강도가 3배 이상 증가하였다. 연성 능력은 무보강 골조에 비해 다소 감소하였으나 보강 강재의 항복으로 인해 우수한 에너지소산을 보였다. 외부강재골조로 보강된 골조는 1층 기둥 단부의 휨 압괴로 최대 하중에 도달하였으며, 피복 탈락 후 기둥 주근의 좌굴로 하중이 감소하였다. 끼움강재골조로 보강된 실험체에 비하여 변형 능력이 우수했던 반면, 에너지소산은 작았다.
실무에서의 보강 설계를 위해 선재로 이루어진 해석모델이 제안되었으며 해석결과는 실험결과와 비교되었다. 해석모델의 연결재는 내부보강의 경우 전단과 압축 거동이, 외부보강의 경우 인장, 압축, 전단 거동이 고려되었다. 해석결과 무보강 골조의 경우 2층 보의 휨 파괴를 나타냈지만, 실험체 보 주근의 부적절한 정착 상세로 인해 실제 파괴모드와 일치하지 않았다. 내부보강골조의 경우는 1층 인장 기둥의 전단파괴를 나타냈으며 실험결과와 부합하였다. 외부보강골조 역시 실험결과와 마찬가지로 1층 RC기둥의 압축파괴를 보였다.
본 학위 논문에서는 비내진상세를 가지는 철근콘크리트 골조에 적용되는 강재 골조 보강법에 따른 내진성능을 검증하기 위해 기존 콘크리트-보강 강재 접합부와 2층-1경간 골조에 대한 실험을 수행하였다. 또한 실험결과를 바탕으로 보강골조에 대한 해석모델을 제안하였고, 탄성 해석 결과와 실험결과를 비교하여 제안된 모델에 대한 설계의 적절성을 확인하고 강재보강골조 시스템에 대한 설계 방안을 제시하였다.
서지정보 내보내기(Export)
닫기소장기관 정보
닫기권호소장정보
닫기오류접수
닫기오류 접수 확인
닫기음성서비스 신청
닫기음성서비스 신청 확인
닫기이용약관
닫기학술연구정보서비스 이용약관 (2017년 1월 1일 ~ 현재 적용)
학술연구정보서비스(이하 RISS)는 정보주체의 자유와 권리 보호를 위해 「개인정보 보호법」 및 관계 법령이 정한 바를 준수하여, 적법하게 개인정보를 처리하고 안전하게 관리하고 있습니다. 이에 「개인정보 보호법」 제30조에 따라 정보주체에게 개인정보 처리에 관한 절차 및 기준을 안내하고, 이와 관련한 고충을 신속하고 원활하게 처리할 수 있도록 하기 위하여 다음과 같이 개인정보 처리방침을 수립·공개합니다.
주요 개인정보 처리 표시(라벨링)
목 차
3년
또는 회원탈퇴시까지5년
(「전자상거래 등에서의 소비자보호에 관한3년
(「전자상거래 등에서의 소비자보호에 관한2년
이상(개인정보보호위원회 : 개인정보의 안전성 확보조치 기준)개인정보파일의 명칭 | 운영근거 / 처리목적 | 개인정보파일에 기록되는 개인정보의 항목 | 보유기간 | |
---|---|---|---|---|
학술연구정보서비스 이용자 가입정보 파일 | 한국교육학술정보원법 | 필수 | ID, 비밀번호, 성명, 생년월일, 신분(직업구분), 이메일, 소속분야, 웹진메일 수신동의 여부 | 3년 또는 탈퇴시 |
선택 | 소속기관명, 소속도서관명, 학과/부서명, 학번/직원번호, 휴대전화, 주소 |
구분 | 담당자 | 연락처 |
---|---|---|
KERIS 개인정보 보호책임자 | 정보보호본부 김태우 | - 이메일 : lsy@keris.or.kr - 전화번호 : 053-714-0439 - 팩스번호 : 053-714-0195 |
KERIS 개인정보 보호담당자 | 개인정보보호부 이상엽 | |
RISS 개인정보 보호책임자 | 대학학술본부 장금연 | - 이메일 : giltizen@keris.or.kr - 전화번호 : 053-714-0149 - 팩스번호 : 053-714-0194 |
RISS 개인정보 보호담당자 | 학술진흥부 길원진 |
자동로그아웃 안내
닫기인증오류 안내
닫기귀하께서는 휴면계정 전환 후 1년동안 회원정보 수집 및 이용에 대한
재동의를 하지 않으신 관계로 개인정보가 삭제되었습니다.
(참조 : RISS 이용약관 및 개인정보처리방침)
신규회원으로 가입하여 이용 부탁 드리며, 추가 문의는 고객센터로 연락 바랍니다.
- 기존 아이디 재사용 불가
휴면계정 안내
RISS는 [표준개인정보 보호지침]에 따라 2년을 주기로 개인정보 수집·이용에 관하여 (재)동의를 받고 있으며, (재)동의를 하지 않을 경우, 휴면계정으로 전환됩니다.
(※ 휴면계정은 원문이용 및 복사/대출 서비스를 이용할 수 없습니다.)
휴면계정으로 전환된 후 1년간 회원정보 수집·이용에 대한 재동의를 하지 않을 경우, RISS에서 자동탈퇴 및 개인정보가 삭제처리 됩니다.
고객센터 1599-3122
ARS번호+1번(회원가입 및 정보수정)